Sumtak Encoder

Sumtak ABSOLUE ENCODER

AE: Absolute 213
AE Angle : Angle Detection
AEA: Multi-turn
AT : ATC, Table Selection Type
ATA: ATC, Table Selection Type
AEC: Battery Backup Type
AEF: Battery Backup Type
AEH: Battery Backup Type

Note: Items marked with * are available to satisfy virtually any users' applications.

Model	Supply Voltage*	Output	Freq. Response	No. of Divisions *	Output Code	Characteristics
AE	DC 5V	Open Collector	20000 count/s	Gray code (Related binary code)	256 div. 512 div. 1024 div. 2048 div. 4096 div. 8192 div.	Low cost, 8192 divisions. Outer dia. 67 mm, shaft 10 mm. Drip-proof construction.
AE Angle Detector	DC 5V DC 15V	Open Collector	20000 count/s	720 1000	Excess reflected binary code (special gray code)	Outer dia. 67 mm, shaft 10 mm. Drip-proof construction. Cam angles be easily obtained by combining with our programmable cam switch SQ-12.
AEA	DC 5V	Open Collector	20000 count/s	10000 (1000 div. x 10 turns)	BCD (Binary-coded decimal code)	Outer dia. 80 mm, shaft 10 mm. Drip-proof construction. Stroken can be easily controlled by combining with our programmable cam switch SQ-13.
AEA	DC 15V	Open Collector	20000 count/s	8192 (1024 div. x 8 turns)	Gray code (Related binary code)
AT	DC 24V	Open Collector	20000 count/s	2 - 120 div.	BCD code Binary code (Pure binary code) With TP(Strobe)	No. of div. and output code can be customized according to customers' requirement Outer dia. 67 mm, shaft 10 mm. Drip-proof construction.
ATA	DC 24V	Open Collector	20000 count/s	2 - 32 div.	BCD code Binary code (Pure binary code) With TP(Strobe)	No. of div. and output code can be customized according to customers' requirement Outer dia. 55 mm, shaft 10 mm. Drip-proof construction.
AEC	DC 5V	Line driver	6000 count/s	2048 div. x 8192 turns	BCD code Serial transmission	Outer dia. 67 mm, shaft 10 mm. Counts up to 8191 turns, because of battery backup. Transits absolute signals and check flags serially. Incorporates incremental and index signals. Use of the hollow shaft eliminates the need of coupling.
AEF	DC 5V	Line driver	5000 count/s	2048 div. x 8192 turns	BCD code Serial transmission	Outer dia. 35 mm, shaft 6 mm. Counts up to 8191 turns, because of battery backup. Transits absolute signals and check flags serially. Incorporates incremental and index signals. Use of the hollow shaft eliminates the need of coupling.
AEH	DC 5V	Line driver	6000 count/s	2048 div. x 8192 turns	BCD code Serial transmission	Outer dia. 40 mm, shaft 6 mm. Counts up to 8191 turns, because of battery backup. Transits absolute signals and check flags serially. Incorporates incremental and index signals.

INCREMENTAL BUILT-IN ENCODER

LHE: Compacts and HIgh Performance
LHR: Compact, High resolution and UVW Signals
LHU: Short Body, UVW Signals
LHF: High Temperature Operation, High resolution
LHK: High Resolution with UVW Signals
LHL: High Resolution, Built-In
LHC: Compact and High Performance
LHD: dia.19 Shaft Diameter, High Resolution
LDA: Short Body, 25 mm
LBK: Compact, Built-In
LKA: Kit Encoder

Note: Items marked with * are available to satisfy virtually any users' applications.

Model

Supply
Voltage*

Output *

Freq.
Response

Mounting
shaft dia. *

No. of
Output Pulse *

Characteristics

LHE

DC 5V

Line Driver
(26C31)

200kHz

6 mm
8 mm

500
1000
2000

2048
2500

Hollow-shaft without coupling.
Compact with 35 mm in outer dia.
Most suitable for AC, DC servo motor and inverter motors.

LHR

DC 5V

Line Driver
(26C31)

200kHz

8 mm

3000
5000

Hollow-shaft without coupling.
Compact with 45 mm in outer dia.
Most suitable for AC, DC servo motor and inverter motors.

LHJ
with
UVW
signal

DC 5V

Line Driver
(26LS31)

200kHz

8 mm
9.525 mm
10 mm
12.7 mm

500
1000
1200
2000
*2048
2400
2500

* LHF only.

Hollow-shaft without coupling.
Short body with 31 mm in depth.
Max. mounting shaft dia. of 12.7 mm.
LHF is high temp. resistance at +85oC.
Most suitable for AC, DC servo motor and inverter motors.

LHF
with
UVW
signal

DC 5V
DC 12V
DC 15V

Line Driver
(26LS31)

Hollow-shaft without coupling.
Short body with 31 mm in depth.
Max. mounting shaft dia. of 12.7 mm.
LHF is high temp. resistance at +85oC.
Most suitable for AC, DC servo motor and inverter motors.

LHK
with
UVW
signal

DC 5V

Line Driver
(26LS31)

200kHz

9.525 mm
10 mm
12.7 mm

5000

Hollow-shaft without coupling.
HIgh resolution available.
Max. mounting shaft dia. of 12.7 mm.
LHK is absolute value outputs of 3 UVW signals.
Most suitable for AC, DC servo motor and inverter motors.

LHL

Note: Items marked with * are available to satisfy virtually any users' applications.

Model

Supply
Voltage*

Output *

Freq.
Response

Mounting
shaft dia. *

No. of
Output Pulse *

Characteristics

LHC

DC 5V

Line Driver
(75ALS192)

200kHz

8 mm

500
1000
2000
2500

Hollow-shaft without coupling.
Compact with 43 mm in outer dia.
Designed for high temp. resistance at 80oC.
High reliability with timmerless hybrid circuit.
Most suitable for AC, DC servo motors.

LHD

DC 5V

Line Driver

200kHz

19 mm

300
512
600
800

1024
1200
1500
2048

2400
3000
3600

Hollow-shaft without coupling.
Complementary output also available.
Compatible with dia. 19 shaft.
Most suitable for AC, DC servo motors.

DC 12~15V

Complementary

100kHz

LDA

DC 5V
DC 12V
DC 15V

Voltage
Line Driver
(26LS31)
Open collector

100kHz

6 mm
6.35 mm
8 mm
9.525 mm
10 mm
12.7 mm

20
50
100
120
150
200

250
300
360
400
500
512

600
800
900
1000
1024
1200

Built-in without coupling.
Ultra short body of 25 mm.
Vibration resistance. High noise immunity realized with trimmerless hybrid circuit.

LBK

DC 5V

Voltage
Line Driver
(26LS31)
Open collector

100kHz

4 mm
5 mm
6 mm
6.35 mm
8 mm
9.525 mm
10 mm

10
100
200
250

500
512
1000
1024

Built-in without coupling.
Ultra-compact, 38 mm in outer dia. and 23 mm in depth.

LKA

DC 5V

Voltage

60kHz

- - -

1000
1024

Kit type with separate slit disk and detector.
For special motors.

INCREMENTAL SHAFT ENCODER

LBJ: Compact and High Performance
LEC: General Purpose with variety
LF : Heavy Duty
LMA: Drip-proof for Servo-Motor
LEP: General purpose, Drip-proof
LFA: High Resolution 25000 P/R
LEJ: For AC, Environment Resistant
LEM: Through Shaft, Environment Resistant
RE : High Frequency
REW: Environment Resistant
FSA: Optical Fiber

Note: Items marked with * are available to satisfy virtually any users' applications.

Model

Supply
Voltage*

Output *

Freq.
Response

No. of
Output Pulse *

Characteristics

LBJ

DC 5V
DC 12V
DC 15V

Volt. Line Driver
(26LS31)
Open collector
Complementary

100kHz

5
10
15
25
50
100
200

250
300
360
400
500
512
600

720
800
900
1000
1024

1200
1250
1500
1800
2000
2048
2500

Ultra-Compact Size:

Outside dia. 38mm,
Shaft dia. 6mm
High noise immunity
Vibration resistance:Trimmerless
Available various mounting flanges.

Note: Items marked with * are available to satisfy virtually any users' applications.

Model

Supply
Voltage*

Output *

Freq.
Response

No. of
Output Pulse *

Characteristics

LEC

DC 5V
DC 12V
DC 15V

Volt. Line Driver
(SN75113)
(SN75113)
Open collector
Complementary

100kHz

20
25
30
40
50
60
90
100
120
125
150
200
240
250
256
300
320
360
400

500
512
600
720
800
900
1000
1024
1200
1250
1500
1600
1800

2000
2048
2400
2500
3000
3125
3600
4000
4096
5000

Hi-Resolution for General Purpose:

Compact and low torque.
Available wide range of applications, including mounting flanges, cables & connectors.

Heavy Duty Type:

Reinforced input shaft.
Shaft Dia: 15mm
Slew speed: 6000r/min.
Drip-proof construction.
High speed response.

LMA

Drip-Proof for Servo System:

DC/AC Servo Motor Direct Coupling.
High speed response.
With special coupling flanges for motors.

LEP

DC 15V

Complementary

50kHz

100
200
300
360
450
500

600
800
1000
1024
1200

Gen. Purpose & Drip-Proof:

Suitable for use in poor environment:
Shaft dia.: 10mm
Standardized complementary outputs for long distance transmission.

Note: Items marked with * are available to satisfy virtually any users' applications.

Model

Supply
Voltage

Output

Freq.
Response

No. of
Output Pulse *

Characteristics

LFA

DC 5V

Line driver
(26LS31)

750kHz

6000
9000
10000
12500
15000
18000
20000
25000

High Resolution:

No. of output pulse: 25000 and response of 750 KHz realized in outside dia. of 63.5 mm
Heavy duty having shaft dia. 8 mm and drip-proof construction
Available Line driver output for long distance transmission.

Note: Items marked with * are available to satisfy virtually any users' applications.

Model

Supply
Voltage *

Output *

Freq.
Response

No. of
Output Pulse *

Characteristics

LEJ

AC 100V
AC 110V
AC 200V
AC 220V

Complementary

100kHz

600
1200
1600
2048
2400

Solid and Heavy Duty:

AC power input(Single-phase)
Drip-Proof construction.
Complementary output.
Suitable for diverse processing plants.

LEM

DC 11~16.5V

Complementary

100kHz

300
512
600
800

1024
1200
1500

2048
2400
3000
3600

Solid and Heavy Duty:

Through shaft (dia. 15, dia.15) available.
Drip-Proof construction.
Complementary output.
Suitable for diverse processing plants.

DC 12V

Complementary

20kHz

any even numbered signal from 40 up to 600P/R.

Solid and Heavy Duty:

Any even numbered pulse from 40 to 600P/R available.
High frequency system resistant to vibration and shock.
Drip-Proof construction.
Complementary output.

REW

Operating temp. up to 120oC.
Any even numbered pulse from 40 to 600P/R available.
High frequency system resistant to vibration and shock.
Drip-Proof construction.
Complementary output.

OTHER RELATED PRODUCT

Manual Pulse Generator, LGF series.

Track Ball, STB series.

RP Scale, RPB series.

High Frequency Pulse Generator, SHE series.

Gear Sensor, MSE series.

Manual Pulse Generator, LGF series.

Short-body, Light weight manual Pulser

Extra-short body and light weight design pulse generator, only 21 mm deep to back of panel and weighing 270 g.
5-15V DC power supply, with standard line driver output suitable for long- distance transmission.
Suitable applications for NC machines by providing home position and interruption signal.

Specification:

Number of output pulse	.	100 pulses/turn dual square wave in quadrature
Supply voltage	.	DC 5V ~ 15V (Ripple less than 1%)
Frequency response	.	5 kHz (electrical)
Output signal	Voltage	"\|"=Supply voltage 0.7V More "0"=0.5V Less
Output signal	Line Driver output	"\|"=2.5V More "0"=0.5V Less
Rise and fall time	.	1 micron sec Less
Current Requirement	Voltage output	60 mA max.
Current Requirement	Line driver output	160 mA max.
Rotational speed	.	Momentary max. 600 rpm
Dial click life	.	3 x 105turns (200rpm Less)
Operating Temperature	Voltage output	-10oC~60oC
Operating Temperature	Line output	0oC~60oC
Weight	.	approx. 0.27 Kg.

TRACK BALL, STB series.

Smooth Operation Converter

A simple touch on a ball resolves both X and Y axis, into output pulses.
Can be mounted at an angle of 30o in each direction.
Ideal applications for radar, color graphics, medical scanners, and ultrasonic diagnostic equipment.

Electrical Specification:

Function No.	Supply Voltage	Current requirement	Output	Output Voltage[V]		Insulation resistance[M ohm] (Output package, between power supply and main unit/DC500 megger)	Frequency Response
				VH	VL
005(pulse train), 006(dual square wave in quadrature)	5 0.5	150	Voltage	2.5	0.5	100 min.	3 kHz.

Mechanical Specification:

Function No.	Speed of Ball	Operating force variable (at starting)	Start angle (Entire direction at mounting	Ball Push-Pressure
005(pulse train), 006(dual square wave in quadrature)	200 r/min.	0.2 ~ 0.5	30o max.	3 N max.

Environmental Specification:

Operating Temperature	Storage Temperature	Vibration resistance	Shock resistance	Weight
+5oC +50oC	-10oC +6oC	88.2 m/s2 (10 - 50 Hz. 4 times each direction)	980 m/s2 (6 ms. 2 times each in X,Y,Z direction)	approx. 0.5 Kg, excl. cable

RP SCALE, RPB series.

Linear Detector with LBJ Model Encode

The rack and pinion mechanism eliminates complex installation. A joint fitted to the linearity operating section allows adjustments to within 1 mm.
Resolution is 0.1 mm, and accuracy is 0.2 mm for 1000 mm of a stroke.
Most suitable for injection molding machines, various types of cutting mechanisms and other automated machines.

Electrical Specification:

Model	Encoder in use	Supply voltage	Output	Output voltage	Sink current	Current requirement
RPB-102	LBJ-002-	12V 10%	Voltage	H: 10 V L:0.5 V	---	120 mA
RPB-103	LBJ-005-	12V 10%	Open collector	---	60 mA	80 mA
RPB-104	LBJ-001-	5V 10%	Voltage	H: 4 V L:0.5 V	---	80 mA
RPB-105	LBJ-004-	5V 10%	Open collector	---	40 mA	80 mA
RPB-106	LBJ-003-	15V 10%	Voltage	H: 12 V L:0.5 V	---	120 mA
RPB-107	LBJ-006-	15V 10%	Open collector	---	60 mA	80 mA
RPB-108	LBJ-007-	5V 10%	Line driver	H: 2.5 V L:0.5 V	---	160 mA

Mechanical Specification:

Stroke	Mechanically allowable measuring speed	Life	Weight incl. main body
100 ~ 500 mm	500 mm/s	2 million cycles	1.13 kg(for 500mm)
100 ~ 1000 mm	300 mm/s	1 million cycles	1.35 kg(for 1000mm)

Environmental Specification:

	Operating Temperature	Storage temperature	Vibration resistance	Shock resistance	Weight
Main body	-10oC +60oC	-20oC +70oC	19.6 m/s2 (10 - 200 Hz. 2 hrs each in X,Y,Z directions)	490.3 m/s2 (2 times each in X,Y,Z directions)	approx. 0.85 Kg, excl. rack

High Frequency Pulse Generator, SHE series.

Features

No contact point-therefore no torque.
High-frequency operation enables long life service.
Even when speed is varied from 0-5 kHz, the peak valuable of the signal is constant.
Long distance of transmission can be provided, because there is little interference from electromagnetic inductions.
Operates at low temperature down to -20oC
Compact and light, yet resistant to vibration, oil and dust.

Application

Revolution speed detector for tachometers, proportional meters and various converters
Detector for counters for automatic cutting in lengths and length adjustment
Digital processing as a pulse generator
Detector for speed control (F/V converter
For applications that require no torque, no contact point or long life service

Specification:

Model	SHE-0001 SHE-0002	SHE-1001 SHE-1002	SHE-2001 SHE-2002	SHE-3001 SHE-3002
Supply voltage	DC 12V10%		DC 6V10%
Output voltage (with 10 K ohm load at 20oC	H: Min. 10 V L: Max. 0.5 V (Input voltage DC 12V)		H: Min. 5 V L: Max. 0.5 V (Input voltage DC 6 V)
Output resistance	1.2 K ohm
Output waveforms	near-rectangular wave
Current requirements	Max. 16 mA		Max. 9 mA
Response	Max. 5 kHz
Mounting	H3 x 8 (ISO) 2 places	M10 screw	M3 x 8 (ISO) 2 places	M10 screw
Connection	Connected with three lead wires in red, white and black. Three core shield cabtyre cable (0.3 mm2 x 3) White: power source+, Red: signal+, Black: power source 0 V and signal common

Gear Sensor, MSE series.

Features

Highly reliable. Used to detect the speed of railway trains.
Detects speeds by sensing iron gear. This sensor outputs dual square signals in quadrature, which agree with gear revolution.
Resistant to mechanical shocks, such as vibration, as well as immersion (equivalent to IPX7)

Electrical Specification:

Supply voltage	Current requirement	Output	Output voltage (with 1.5 K ohm load)		Min. load resistance	Rise time	Fall time	Frequency response time
			VH	VL
DC 12V10%	45 mA	Complementary	Min. 7 V	Max. 1 V	---	Max. 3µs	Max. 3µs	10 kHz.

Environmental Specification:

Operating temperature	Storage temperature	Vibration resistance	Enclosure	Clearance	Weight
-20oC ~ +85oC	-25oC ~ +90oC	171.6 m/s2 (50 Hz. 8 hrs each in X,Y,Z direction)	Immersion-proof (equivalent to IPX7)	0.3 mm ~ 1.0 mm (between sensor and gear)	approx. 2 Kg

Specification of Gear

Shape of gear teeth	Module	Pressure angle	No. of teeth	Face width	Accuracy	Material
Involute gear	2	20o	60	min. 10 mm	JIS Class 4	SS400

Optical Rotary Encoders

Incremental Encoders
Manufacturer	Model	Outside Diameter	Shaft Type	Shaft Diameter	Output Type
Sumtak Encoder	IRS3 Series	35mm	Shaft	6mm	5V Line Driver 5V Open Collector 12-24V Open Collector 12-24 Complementary
Sumtak Encoder	IRH3 Series		Hollow Shaft	8mm	5V Line Driver (With CS) 5V Line Driver 12-24 Complementary
Sumtak Encoder	IRT3 Series		Through Shaft	8mm	5V Line Driver (With CS) 5V Line Driver 12-24 Complementary
Sumtak Encoder	IRM3 Series		Modular	6/8mm	5V Line Driver (With CS) 5V Line Driver 12-24V Complementary
Sumtak Encoder	IRS5 Series	56mm	Shaft	8mm	5V Line Driver 12-24V Complementary
Sumtak Encoder	IRH5 Series	56mm	Hollow Shaft	8mm	5V Line Driver
Sumtak Encoder	IRS6 Series	66mm	Shaft	15mm	5V Line Driver 12-24V Complementary
Sumtak Encoder	IRT8 Series	87mm	Through Shaft	25mm/50mm	10-30V Complementary


Manufacturer	Model	Outside Diameter	Shaft Type	Shaft Diameter	Output Type
Sumtak Encoder	AEI Series	35mm	Hollow Shaft	6mm	Line Driver (Serial)
Sumtak Encoder	ARS5 Series	58mm	Shaft	10mm/6mm	EnDat2.2
Sumtak Encoder	ARC5 Series	58mm	Taper Shaft	9.25mm (1/10)	EnDat2.2

Other Encoders

Absolute Encoders
	Model	Outer Diameter	Shaft Type	Shaft Diameter	Output Type
SUMTAK	AEJ Series	38mm	Shaft	6mm	12-24V Open Collector
SUMTAK	AE Series	67mm	Shaft	10mm	Open Collector

High Frequency Sensor
Manufacturer	Model	Output Type
	SH Series	Voltage Output

Explosion-proof System

Manufacturer

Model

System Type

Sumtak Encoder

SBF-14

Pulse Coupler	: BF-14
Sensor	: SHE

Sumtak Encoder

SBF-16

Pulse Coupler	: BF-16
Sensor	: SH

Sumtak Encoder

SBF-18

Pulse Coupler	: BF-18
Rotary Encoder	: LBI

Insulation Amplifier

Manufacturer	Model	Explanation
Sumtak Encoder	SHM	High Speed Pulse Amplifier for DIN Rail
Sumtak Encoder	RMM	Rate Multiplier
Sumtak Encoder	FIM	FV-FI Converter

Sumtak Digital Counter
VES/VEC Series

Features

5 digits red LED display, compact and handy DIN size.

Wide range measurement by direct input from contact free SHE model sensor.

Stable display by gate time method.(VES)

Easy setting of decimal point and multiplication function by rear dip switches.(VES)

Various display function by MPU(VEC)

Cyclic computation method enables measurement of even one pulse(VEC)

Easy setting of decimal point and cycle by rear dip switches(VEC)

Manufacturer	Sumtak	Sumtak
Model	VES	VEC
Power Supply	AC100V/200V-10%,+20% 50/60Hz	AC100V/110V±10% AC200V/220V±10% 50/60Hz
Power Supply for Sensor	DC12V}10% 100mA
Input Signal Type	Voltage
Maximum Frequency	30kHz	0.5Hz to 30kHz

Sumtak Coupling

C-19-15K/15K
C-61-6SS/6S
C-22-AS/BS

Feel free to contact us for other couplings.

Sumtak MICRO Coupling
C-19-15K/15K

Sumtak MICRO Coupling
C-22-AS/BS

Sumtak Mounting Parts AF5 AF6
Feel free to contact us for other Mounting Parts.

Sumtak	AF5-001
Sumtak	AF6-001
Sumtak	AF6-002
Sumtak	AF6-003

Other Products

Manual Pulse Generator
SUMTAK	Model	Explanation
SUMTAK	LGT	Manual Pulse Generator (Hand Wheel)

Sumtak Encoder

Model : SWEC - 512 – S190

( LEC – 512B – S190A )

MSK-015-1024 - Encoder

Sumtak Encoder MSK-015-1024

SUMTAK Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.

Sumtak Encoder hakk?nda daha fazla bilgi i?in t?klay?n?z.

Sumtak Encoder

The Product List