Migatron

Migatron Products

Self Contained Sensors

Self contained sensors are devices where the sensor and the controller are built into the same unit.

Migatron RPS-150
Ranges: 2-40", 5-80"
Broad beam
On/off output with analog capability

Migatron RPS-150A
Ranges: 2-40", 5-80"
Broad beam
Analog output

Migatron RPS-400-6
Range: 2-6"
Narrow Beam
Three wire NPN transistor output

Migatron
RPS-400-30 Sensor
Self Contained
Sensing Range 5-30"
Narrow Sensing Beam

Migatron RPS-401,426
Ranges: 4-40", 8-80"
Narrow beam
On/off output

Migatron RPS-401A,426A
Ranges: 4-40", 8-80"
Narrow beam
Analog output

Migatron RPS-401A-80P
Ranges: 8-80"
Narrow beam
Analog output

Migatron RPS-409A
Ranges: 4-40", 6-80" and 10-144"
Analog output
Temperature compensation
Sync/enable option

Migatron
RPS-409A-IS
Ranges: 4-40", 6-80", 12-144", 12-216"
Analog output
Intrinsically Safe Design
UL Listed

Migatron
RPS-412A
High accuracy analog ultrasonic sensor (±0.002" or 0.05% of range, which ever is greater, at 25°C).

Migatron RPS-450,475
Ranges: 5-30", 10-72"
Proximity sensor

Migatron
TBT/TBR-600
Range: 0-40"
Thru beam
On/off output
Adjustable. count rate

Migatron RPS-3000/4000
Range 2-40 feet
Analog output
Temperature compensation

RPS-412A
HIGH ACCURACY SENSOR

Features

Input Voltage 20-30 VDC

Analog Voltage Output

Short Circuit Protected

Wide Temperature Range

Temperature Compensation

Self Contained Sensor

Quick Disconnect Connector

Stainless Steel Housing

Migatron

The RPS-412A is a high accuracy analog ultrasonic sensor (±0.002" or 0.05% of range, which ever is greater, at 25°C). The sensor has a built in temperature compensation target, that monitors and compensates for air temperature 50 times per second. The sensor also compensates for changes in relative humidity, changes in barometric pressure, and other factors that influence the speed of sound.

The RPS-412A has a 47mm stainless steel barrel housing. The stainless steel housing is electrically isolated from the sensor electronics. The sensor comes with two jam nuts for mounting.

The RPS-412A has a 0-10V analog output. The analog output is fixed. The RPS-412A-16 is 0.625V per inch. The RPS-412A-10 is 1.000V per inch. For example using the 3-16" range version, a target placed 3 inches from the sensor face will result in a sensor output of 1.875V. A target placed 16 inches from the sensor face will result in a sensor output of 10.0V.

The RPS-412A is designed to take advantage of today's PLC and computer analog input cards. The analog input card will determine the resolution of the system. The numerical values programmed into the PLC or computer will determine the zero and span.

SPECIFICATIONS

Model:                      Range:            Volts per Inch:
RPS-412A-10-V         3" -10"               1.000V
RPS-412A-16-V         3" -16"               0.625V

Accuracy: ±0.002², or ± 0.05% of range (which ever is greater) @ 25ºC.
                  ±0.2% of range from 0 to 50ºC

Power Input: 20 to 30VDC Reverse Polarity Protected

Input Current: 65mA Typical

Operating Temperature: 0 to 50ºC

Output: Analog Voltage Output

Short Circuit Protected

Output Referenced to Power GND or Signal GND

Load 500 Ohms to Infinity

Frequency: 60kHz

Housing Material: Stainless Steel with PVC Head

Sample Rate: 20ms Typical

Update Time: 2s Maximum

Weight: 22 oz. (shipping weight 3 lbs.)

Figure:
A- Wiring Diagram
B- Back View of Sensor
C- Connector Diagram
D- Housing Diagram

PART NUMBER	RANGE OUTPUT	DESCRIPTION
RPS-412A-10-V RPS-412A-16-V	3" to 10" 3" to 16"	0 - 10VDC Analog Output 0 - 10VDC Analog Output
F32-5070042 F32-5070053 F32-5070094		6' Snap-In Cable, Straight (sold separately) 6' Locking Cable, Straight (sold separately) 6' Locking Cable, Right-Angle (sold separately)

SENSOR SETUP

Air Temperature:

The air temperature between the sensor and target must be constant. Any variations in air temperature will compromise the accuracy. The sensor can compensate for changes in air temperature provided the air temperature is constant between the sensor and target. If the air temperature varies between the sensor and target (For example if the air temperature is 20°C from the sensor face to half way to the target, and the air temperature is 25°C for the remainder of the distance) the sensor cannot compensate for the temperature variation.

Sensor Alignment:

The sensor must be aligned to obtain the best accuracy. To align the sensor place the target you will be measuring at the farthest distance it will be from the sensor. Monitor the color of the LED on the sensor (green is no signal, light red is a weak signal, and bright red is a strong signal) align the sensor, so the LED is the brightest red color you can get. This will be the optimum alignment of the sensor.

Calibration:

The sensor comes pre calibrated from the factory. The sensor may be recalibrated in the field.

Follow the steps below to recalibrate.

1. Sensor alignment must be done before calibration.

2. P1 must be adjusted first.

3. Place the target at the near distance (closest distance target will get to sensor). Measure the distance from the target to the transducer face (DO NOT TOUCH THE FACE OF THE TRANSDUCER).

4. Calculate the voltage for the near distance. Multiply the distance by the volts per inch. Adjust P1 for the calculated voltage.

5. Place the target at the far distance (farthest distance target will be from sensor). Measure the distance from the target to the transducer face.

6. Calculate the voltage for the far distance. Multiply the distance by the volts per inch. Adjust P2 for the calculated voltage.

7. Repeat the adjustment of P1 and P2 to check for accuracy.

Close Range Sensors

Detect objects within 2 to 6 inches of the sensor.

Migatron

RPS-400-30 Sensor

Self Contained Sensor
Sensing Range 5-30"
Narrow Sensing Beam

Migatron RPS-400-6
Range: 2-6"
Narrow Beam Sensor
Three wire NPN transistor output

Migatron RPS-100
Ranges: 2-14", 5-72", 10-240"
Broad Beam Sensor
On/Off Output with analog capability

Migatron RPS-102
Ranges: 2-14", 5-72", 10-240"
Broad Beam Sensor
On/Off Output

Migatron RPS-150
Ranges: 2-40", 5-80"
Broad Beam Sensor
On/Off Output

Migatron RPS-150A
Ranges: 2-40", 5-80"
Broad Beam Sensor
0 - 10VDC and 4 - 20 mA Analog Output

Migatron RPS-2100
Ranges: 2-14", 5-72", 10-240"
Broad Beam Sensor
On/Off Output

Intrinsically Safe and Explosion Proof Sensors

Ultrasonic sensors for use in environments classified as hazardous.

Migatron	RPS-409A-IS Ranges: 4-40", 6-80", 12-144", 12-216" Narrow Beam 0 - 10 VDC Analog Output
Migatron	RPS-326-X Ranges: 24-72", 24-240" Narrow Beam On/Off Output with analog capability

Controllers With Remote Sensing Heads

These are devices where the sensor and the controller are separate units and can be located in separate locations.

Migatron	RPS-100 Ranges: 2-14", 5-72", 10-240" Broad beam sensor On/off output with analog capability
Migatron	RPS-102 Ranges: 2-14", 5-72", 10-240" Broad beam sensor On/off output, dual transducers
Migatron	RPS-300 Ranges: 4-14", 5-36", 8-72" Narrow beam sensor on/off output with analog capability
Migatron	RPS-300T Teflon ® Ranges: 4-14", 5-36" Narrow beam sensor On/off output with analog capability
Migatron	RPS-302 Ranges: 4-14", 5-36", 8-72" Narrow beam sensor On/off output
Migatron	RPS-322 Range: 8-72" Narrow beam sensor Dual transducers, on/off output
Migatron	RPS-325 Range: 8-72" Narrow beam sensor On/off output with analog capability, sealed transducer
Migatron	RPS-326 Range: 24-72", 24-240" Narrow beam sensor Explosion-proof On/off output with analog capability
Migatron	RPS-500 Analog ranging card Zero, span, sample, and hold controls
Migatron	RPS-2100 Ranges: 2-14", 5-72", 10-240" Broad beam sensor On/off output
Migatron	RPS-2300 Ranges: 4-14", 5-36", 8-72" Narrow beam sensor On/off output
Migatron	RPS-2325 Range: 8-72" Narrow beam sensor On/off output steel transducer
Migatron	RPS-8000 Ranges: 4-12", 5-36", 8-72" Multiplexed: 2-8 transducers Narrow beams sensor On/off output

Set Point Controllers

These are control devices that have adjustable set points.
You can set the controller with from one to four set points.

Migatron	M-1000 An analog controller with four individual set-points and temperature compensation.
Migatron	SPC-701 Set point controller One adjustable set point.
Migatron	SPC-704 Set Point Controller Four adjustable set points

Migatron hakk?nda daha fazla bilgi i?in t?klay?n?z.

Migatron	RPS-150 Ranges: 2-40", 5-80" Broad beam On/off output with analog capability
Migatron	RPS-150A Ranges: 2-40", 5-80" Broad beam Analog output
Migatron	RPS-400-6 Range: 2-6" Narrow Beam Three wire NPN transistor output
Migatron	RPS-400-30 Sensor Self Contained Sensing Range 5-30" Narrow Sensing Beam
Migatron	RPS-401,426 Ranges: 4-40", 8-80" Narrow beam On/off output
Migatron	RPS-401A,426A Ranges: 4-40", 8-80" Narrow beam Analog output
Migatron	RPS-401A-80P Ranges: 8-80" Narrow beam Analog output
Migatron	RPS-409A Ranges: 4-40", 6-80" and 10-144" Analog output Temperature compensation Sync/enable option
Migatron	RPS-409A-IS Ranges: 4-40", 6-80", 12-144", 12-216" Analog output Intrinsically Safe Design UL Listed
Migatron	RPS-412A High accuracy analog ultrasonic sensor (±0.002" or 0.05% of range, which ever is greater, at 25°C).
Migatron	RPS-450,475 Ranges: 5-30", 10-72" Proximity sensor
Migatron	TBT/TBR-600 Range: 0-40" Thru beam On/off output Adjustable. count rate
Migatron	RPS-3000/4000 Range 2-40 feet Analog output Temperature compensation