Label Types
UltraLRD V2: Ultrasonic Label Sensor with Wide Fork for All Label Types
The UltraLRD V2 uses ultrasonic technology to reliably sense every label type including metallic, clear, and low-contrast labels, and features a 4mm (0.16") fork.
This sensor requires a separate, 5-pin, M12 connecting cable (6200-0081).
LRD6110: Capacitive Label Sensor for All Label Types
LRD6110 kapasitif etiket sensörü hislerim etiket türleri: açık, kağıt, metal sanat, metalik mürekkep, folyo, ya da sıcak pullar. Bu aynı zamanda anlamda splices!
LRD2100: Capacitive Label Sensor for Metal-Free Labels (Clear or Paper)
This award winning capacitive clear label sensor features accurate, reliable, stable registration for clear and paper labels.
Adjustments are not required when changing roll stock or environment.
This clear label sensor is also great for detecting splices! It works great with paper labels too.
For metallic labels or labels with foil-stamp artwork - use the LRD6110.
Ordering:
LRD2100 with attached cable: P014-4663
LRD2100C with M12, 5-pin connector: P014-4664
Cable for LRD2100C: 6200-0080
LRD3100: Precision Label Sensor for Clear & Opaque Labels in Tight Spaces
The technology of the original Clear Label Sensor applied to tight spaces. The same stable, reliable, accurate sensing of the LRD2100 repackaged with a separate sensor head to squeeze into smaller areas.
Also great for detecting splices!
The LRD3100 will not work with metallic labels or labels with foil-stamp artwork - use the LRD6110.
LRD4100: Vertical Label Sensor for Clear & Opaque Label Slitting/Rewinding
A Clear Label Sensor for high-speed counting on slitters rewinders. Vertically mounted for multiple unit operation. Use on drug and other critical label counts during slittling and rewinding. Faster than standard optical sensors AND it works with clear-on-clear labels.
The LRD4100 will not work with metallic labels or labels with foil-stamp artwork.
LionEye2: Optical Label Sensor
The LionEye2 optical sensor provides simplicity and low cost for general label registration - with Lion Precision customer service and reliability.
A two-button interface makes the LionEye2 flexible and easy to use.
Requires M8, 4-pin connecting cable: 6200-0090
The LionEye2 is a replacement for the original LionEye
LRD5100: Tear-Tape Sensor
Tear-tape sensing for overwrap packaging. LRD5100 will sense missing clear or colored tear-tapes in overwrap applications.
Lion Precision / Label Sensors
Lion Precision / Label Sensors ürünleri ile uygun rekabetçi fiyatları almak için müşteri temsilcimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.
Lion Precision / Label Sensors hakk?nda daha fazla bilgi i?in t?klay?n?z.