ARJAY ENGINEERING
ARJAY Level Controls
Capacitance level probes for liquids and solids are available with relays, 4-20 mA outputs, RS-485 communication, and user friendly display
Model 9820 Probe mounted Switch
Model 9830 Remote mounted Switch
Model 9080 Probe mounted Transmitter
Series 2000 Remote mounted Controller
ARJAY Open Channel Flow
Model 2114-OCF
Pre-programmed weir and flume calculations are available on this unit with flow, level, and totalization relays. The display provides flow rate and totalization.
ARJAY Plugged Chute Detection
Model 9830-PCD
The in-line non-intrusive sensor measures the dielectric change as solids displace air during a plugged condition. This alerts equipment and
operators before extensive process damage occurs
ARJAY Area Leak Alarm
Model 9830-LPS
Up to 3 sensor pucks can be monitored for a common alarm at the remote alarm box. The sensors can be placed around machinery, tanks, in electical vaults, sub-floors... anywhere a liquid leak might occur
ARJAY Tank Leak Alarms
Model 9830-ILA
A flexible sensing cable wraps the belly or end of a double-walled tank to measure liquid intrusion into the interstitial space. The alarm unit can be mounted safely away from the tank
ARJAY Dry Pump + Phase Detection
Model 9820-DPM (integral electronics)
Model 9830-DPM (remote electronics
The in-line non-intrusive sensor measures the dielectric change as th liquid changes from one dielectric phase to another (ie. water to oil
if there is a change in the presence or absence of liquid in the pipe.
ARJAY Floating Oil Spill Alarm
Model 9830-HCF
Ideal for sumps and containments, the floating sensor rides the changing water level and will alarm when oil accumulates on the water surface.
ARJAY Oil Thickness Monitor
Model 2114-HCF
Used where the accumulation of oil is desirable but is to be monitored for alarms or controlled pump out. The floating sensor follows the
changing water levels in a non- static vessel
ARJAY Oil/Water Separator Monitors
Model 9820-OWS Probe mounted Switch
Model 9830-OWS Remote mounted Switch
Model 2114-OWS Continuous Monitor
Probes and monitors are available to alert personnel when the Oil Water Separator has accumulated oil. Simple alarms to continuous monitors for pump control and valve operation are standard
ARJAY Oil/Water % Concentration
Model 2114-OWM
The capacitance probe monitors the dielectric change in pipes, tanks and oil/water knock-out systems as the oil emulsion transitions from an oil phase to a water phase. Multiple probes can profile a tank for process optimization
ARJAY ppm Oil in Water Monitors
FluoroCheck II bench top unit
This benchtop model uses a fluorescence technique to readily correlate to laboratory methods such as EPA 1664 and ISO 9377-2. The standard measurement range is 0-100 ppm petroleum oil (TPH) in water
ARJAY HydroSense 2410
ARJAY on-line industrial wastewater and produced water
The unique non-contacting flow through design is ideal for industrial wastewater and produced water applications. The fluorescence approach is selective to petroleum hydrocarbons for process and environmental monitoring.
ARJAY HydroSense 3410 and 3420
on-line clean or filtered water
The closed loop design uses a fluorescence or light scatter technique for oils in clean or filtered water. The 3410 is selective to petroleum oils. The 3420 responds to any oil type. These are typically used on cooling water and bilge separators
Related Arjay Products Arjay Product Overview AR-OV-09
EC-GOLD Gas Monitors
The EC-Gold is ideal for toxic gas monitoring in commercial and light industrial applications such as parking garages and warehouses. An analog 4-20mA and RS-485 communication is standard
ARJAY EC-GOLD Dual
This complete stand alone monitor offers a LCD display, alarm relays, buzzer and analog output. Up to 2 on-board sensors plus remote inputs
are available. Ideal for maintenance and municipal vehicle storage
ARJAY Specialty Control Panels and Instrumentation
Let Arjay help you design and build a panel or control system specific to your needs. Our technical engineering staff and UL Approved assembly facility can assist with any facet of your project
ARJAY Water Cut Monitors
Capacitance sensors with temperature compensation reliably measure water cuts from 0 to 25% water in oil. These instruments are used
for process monitoring and custody transfer applications.
ARJAY ENGINEERING
ARJAY ENGINEERING Ürünleri ile uygun rekabetçi fiyatları almak için müşteri temsilcimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.
ARJAY ENGINEERING hakk?nda daha fazla bilgi i?in t?klay?n?z.