MAXIMATOR
Products
High Pressure Pumps
The compact, low-cost MAXIMATOR High-pressure Pumps are driven 
by air or noble gas pressures between 1 bar and 10 bar. There are
numerous potential applications for MAXIMATOR Pumps in machine
engineering, oil and gas industries, chemical and pharmaceutical industries, defence,
mining and the construction industry as well as in aviation and aeronautics.
MAXIMATOR power packs for oil, water or aggressive media are 
complete hydraulic units ready for connection which are provided for
generating operating pressures up to 5,500 bar.The hydraulic
systems can be used for all kinds of testing and clamping or for other
functions requiring a determined pressure.
Air Amplifiers
MAXIMATOR PLV series Air Amplifiers are suitable for the 
compression of pressurised air or nitrogen. The units are capable of
increasing normal pressures of 4 bar or 6 bar to the desired final pressures.
The PLV Air Amplifiers are operated with normal shop air and are provided with
a variety of amplification ratios.
Air Amplifier Stations
All Air Amplifiers can be supplied with an air control unit comprising a filter, 
pressure regulator with pressure gauge and an air shut-off
valve. The desired operating pressure can be preset by means of the
air control unit in correspondence with the different pressure ratios. We can offer you a
choice between a standard Air Amplifier Station or a customised solution.
Gas Boosters
The MAXIMATOR high pressure boosters are suitable for the oil free 
compression of gases and air. Industrial gases like Argon, Helium,
Hydrogen and Nitrogen can be compressed to operating pressures
of 1,500 bar (21,750 psi), Oxygen to 350 bar (5,075 psi).
Booster Stations
MAXIMATOR Booster Stations for nitrogen or a wide variety of other 
gases are complete booster stations ready for connection which are
provided for generating operating pressures up to 1,500 bar.The
Booster stations can be used for all kinds of testing and filliing or for
other functions requiring a determined high pressure.
Valves, Fittings & Tubings
The MAXIMATOR valves, fittings and tubing are suitable for different 
media and operating pressures up to 10,500 bar.
Gas Assisted Systems
This special technology is applied in plastics injection moulding and 
provides the following advantages: Reduction of cycle times,
Prevention of sunk spots, Reduction of locking forces, Low-warp
mouldings, Simplified mould design, Reduction of ridge formation,
Material savings up to 50 %
3/3-Port Directional Control Valve
Valves for operating pressures of up to 1,000 bar and this directional 
control valve in combination with the electronic control system allow for easy,
swift and continuous regulation of the variables flow and pressure in gases
and fluids with a high level of repeating accuracy.
The valve is manufactured in sizes NG 4 (HPV 4) and NG 10 (HPV 10) and
can be supplied with or without integrated pilot control hydraulic supply.
The scope of supply also includes the control electronics with PID controller,
actual value and set point input in the form of a 19" card, relevant to the respective valve.
Test Stands
MAXIMATOR has an extensive know-how concerning concept, 
development, construction and manufacturing of test benches and
pressure-generating systems. Hoses, pipes, tanks, accumulators, valves,
fittings, plastic and ceramic parts as well as special components of the
diesel injection technique (rails, nozzles, nozzle brackets injectors) and
other vehicle components (e.g. air bag accumulators,
camshafts and intermediate shafts, gears) are tested or
manufactured with MAXIMATOR stations successfully.
MAXIMATOR
MAXIMATOR ürünleri ile uygun rekabetçi fiyatları almak için müşteri temsilcimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.
MAXIMATOR hakk?nda daha fazla bilgi i?in t?klay?n?z.