Model 205

Model
215-2K
Two Conductors,
2@15amps & 2,000V

Disconnects included (4 lg.)
Boot Kit available
Available with stainless steel
ball bearing (215-2KSS)

Model No. Terminals Voltage
AC/DC Amp
Rating
@2000VAC Max.
Freq.
MHz Contact
Resistance Max.
RPM Temp
Max. F (C) /
Min. F (C) Rotation
Torque (gm-cm) Circuit
Separation

215-2K 2 0-2,000 15 100

<1m

1200 140 (60) /-20(-29) 400

>50M

215-2KSS 2 0-2,000 15 100

<1m

1200 140 (60) /-20(-29) 400

>50M

"SS" designator indicates stainless steel ball bearing (recommended for wet or corrosive environments)

Model 215-2K Accessories

57235
Boot Kit for dust or splash
protection IP51 552KA
Terminal 22 - 18 AWG
(qty. 4 included) 55253
Shrink Tube
(qty. 4 included)

Terminals for 16-14 AWG wires available (p/n 552KB).

Model 215-2K Standard Wire Connections

Model 215-2K Wire Connections With Optional Boot

Model 215-2K Suggested Mounting Methods

Model 215-2K is typically mounted by either the black body or the white plastic bushing on either end using a set screw. When mounting horizontally, mount the Mercotac so the body of the connector rotates.

Typical Body Mount Hole Dimensions

MODEL HOLE DIAMETER (Ø) * DEPTH

215-2K, et al 1.248"    (31.7) .80"    (20.3)

Typical Bushing Mount Hole Dimensions

215-2K, et al .748"    (19.0) .80"    (20.3)

*Inch (mm) Tolerance Ø +.001" (+.025)

   -.000" (-.000)

More Info Price

Model 230

Model 230 Two Conductors, 30 Amps

Disconnects included (4 lg.) Boot kit available Available with stainless steel ball bearing (230-SS)


Model No.	Terminals	Voltage AC/DC	Amp Rating @240VAC	Max. Freq. MHz	Contact Resistance	Max. RPM	Temp Max. F (C) / Min. F (C)	Rotation Torque (gm-cm)	Circuit Separation

230

0-250

200

<1m

1800

140 (60) /-20(-29)

200

>25M

230-SS

0-250

200

<1m

1800

140 (60) /-20(-29)

200

>25M

"SS" designator indicates stainless steel ball bearing (recommended for wet or corrosive environments)

230 Accessories


55251 Terminal 16 - 14 AWG (qty. 2 included)		57230 Boot Kit for dust / splash protection IP51

	55250 16 - 14 AWG (qty. 2 included)

Terminals for other wire gauges available. (22-18 AWG and 12-10 AWG)

230 Standard Wire Connections

230 Wire Connections With Optional Boot Kit

230 Suggested Mounting Methods

Model 230 is typically mounted by the black body or the white plastic bushing on either end using a set screw. When mounting horizontally, mount the Mercotac so the body of the connector rotates.

Typical Body Mount Hole Dimensions
MODEL		HOLE DIAMETER (Ø) *	DEPTH
230 et al		.998" (25.35)	.80" (20)

Typical Bushing Mount Hole Dimensions
230 et al		.500" (12.70)	.40" (10)
*Inch (mm) Tolerance Ø	+.001" (+.025)
	-.000" (-.000)

Installation Notes:

the up arrow should not point below horizontal
do not solder to or bend connector tabs
avoid lateral forces and mechanical loads (overly stiff or tight wires)
do not rigid mount both ends of connector
limit mounting eccentricity (runout / wobble) to .005" (.13mm)
provide overload protection within the circuit
avoid vibration and bumping motions

Back Top Top

More Info Price

Model 235

Model 235
Two Conductors,
2@30amps & 500V

Disconnects included (4 lg.)
Boot Kit available
Available with stainless steel
ball bearing (235-SS)

Model No. Terminals Voltage
AC/DC Amp
Rating
@240VAC Max.
Freq.
MHz Contact
Resistance Max.
RPM Temp
Max. F (C) /
Min. F (C) Rotation
Torque (gm-cm) Circuit
Separation

235 2 0-500 30 100

<1m

1200 140 (60) /-20(-29) 400

>50M

235-SS 2 0-500 30 100

<1m

1200 140 (60) /-20(-29) 400

>50M

"SS" designator indicates stainless steel ball bearing (recommended for wet or corrosive environments)

235 Accessories

57235
Boot Kit for dust or splash
protection IP51 55250
Terminal 16 - 14 AWG
(qty. 2 included) 55251
Terminal 16 - 14 AWG
(qty. 2 included)

Terminals for other wire gauges available.
(22-18 AWG and 12-10 AWG)

235 Standard Wire Connections

235 Wire Connections With Optional Boot

235 Suggested Mounting Methods

Model 235 is typically mounted by either the black body or the white plastic bushing on either end using a set screw. When mounting horizontally, mount the Mercotac so the body of the connector rotates.

Typical Body Mount Hole Dimensions

MODEL HOLE DIAMETER (Ø) * DEPTH

235, et al 1.248"    (31.7) .80"    (20.3)

Typical Bushing Mount Hole Dimensions

235, et al .748"    (19.0) .80"    (20.3)

*Inch (mm) Tolerance Ø +.001" (+.025)

   -.000" (-.000)

Installation Notes:

the up arrow should not point below horizontal

do not solder to or bend connector tabs

avoid lateral forces and mechanical loads (overly stiff or tight wires)

do not rigid mount both ends of connector

limit mounting eccentricity (runout / wobble) to .005" (.13mm)

provide overload protection within the circuit

avoid vibration and bumping motions

Back Top Top

More Info Price

MERCOTAC MARKASINA A?T ?R?N GRUPLARI

1-One Conductors

2-Two Conductors

3-Three Conductors

4-Four Conductors

6-Six Conductors

8-Eight Conductors

A-Company

B-FAQ

MERCOTAC_Model 215-2K Two Conductors

PRODUCT OVERVIEW

SPECIFICATIONS OVERVIEW

Technical

USING SLIP RINGS?


57235 Boot Kit for dust or splash protection IP51	552KA Terminal 22 - 18 AWG (qty. 4 included)	55253 Shrink Tube (qty. 4 included)

Terminals for 16-14 AWG wires available (p/n 552KB).


57235 Boot Kit for dust or splash protection IP51	55250 Terminal 16 - 14 AWG (qty. 2 included)	55251 Terminal 16 - 14 AWG (qty. 2 included)

Terminals for other wire gauges available. (22-18 AWG and 12-10 AWG)

Model 205

Model 230

Model 235

MERCOTAC MARKASINA A?T ?R?N GRUPLARI

The Product List