D-ZS 087-20 |
For optimal alignment of flame sensor with the ball flange and/or for displaying the configuration of flame sensor and switching device |
|
Display of the flame signal (pulse rate) |
|
Storing of minimum and maximum pulse rate values |
|
Voltage supply via the flame sensor |
|
D-ZS 129-30/-40 |
Installation in 19“ frame |
|
3RU/3HP |
|
Input 0 / 4 ...20 mA |
|
D-ZS 077-10 |
For the functional test of flame sensor Models D-LE 103 UL, D-LE 603 UH/US and compact flame monitor D-LX 100 UL |
|
Power Supply 230 VAC / 50 Hz |
|
D-ZS 093 |
zFor the functional test of flame sensor Models D-LE 603 UA/UAF/IS/IG/ISE/ISO, D-LE 701 UA/UAF/IS/IGA, D-LE 703 UA/UAF/ IS/IG, D-GT 800 UA/UAF, as well as compact flame monitor D-LX 100 UA/UAF/IS/IG |
|
Power Supply 230 VAC / 50 Hz |
|
D-ZS 118 |
D-ZS 130 |
Installation in 19“ rack/enclosure |
|
3RU / 10HP |
|
Power supply 24 VDC |
|
Protection IP00 |
|
D-NG 24/05 |
To supply two D-UG 120 switching devices or D-LX 100 compact flame monitors |
|
DIN-rail installation |
|
Input voltage 115/230 VAC, output voltage (unregulated) 24 VDC/0,5 A |
|
Protection IP20 |
|
D-ZS 033 |
D-ZS 117 Rigid up to120°C |
D-ZS 133 |
Housings for DURAG Devices D-BT 0... For mounting of switching cabinet in the inner area (IP00), e.g. hinged frame assembly Cable connection via 48-pin screwed multipoint socket connector Terminal clamp from rear
19” rack for front panel mounting of
D-UG 660 control unit
D-BT 660... |
For mounting of switching cabinet in the inner area (IP00), e.g. rear panel assembly |
|
Cable connection via connection terminals |
|
Clamp connection from front |
|
D-UG 660 G66 |
For wall mounting in the outdoor area |
|
Cable connection via terminals in separate terminal box |
|
Protection IP55 |
|
D-BT 1... |
For wall mounting in the outdoor area |
|
Cable connection via terminals in separate terminal box |
|
Protection IP55 |
|
D-ZS 140 / 141 |