* Ronan - I / P & P / I Transducers
Ronan - I / P & P / I Transducers
Ronan pnömatik kontrol (I / P) ve izleme (P / I) uygulamaları; X55-600 Serisi ve X55-300 Serisi sırasıyla tamamlayıcı ürünler sunmaktadır. Her iki yöntem de son derece güvenilir solid-state basınç sensörleri ve kontrol elemanları maliyet yüksek doğruluk ile etkin çözümler sunmak, sıcaklık kararlılığı, titreşim direnci ve kolay kurulum ve bakım
More Info PriceRonan -Current to Pressure Transducer Model X55-600 Series
¨ Low Air Consumption (0.002 SCFM)
¨ No Pre-regulator required
¨ Supply Pressure to 120 psi
¨ Vibration and shock Resistant
¨ Mount in any Position
¨ 0.2% of Span Accuracy
¨ Reverse/Direct and Split Range Operation
¨ -40 to +150°F Operation
¨ Standard 3-15, 3-27 or 6-30 psi Ranges
¨ Non-standard ranges available
¨ Worldwide approvals
The Ronan X55-600 Series I to P transducers are reliable, stable, accurate and versatile. But, more important, they are "Hard to Plug." The wide dynamic range on the control elements and associated solid-state technology allows the circuitry to compensate, even when passageways become partially obstructed. The technology and the physical design actually allows contaminates to "blow through." Additional features include, high immunity to shock and vibration, extremely low air consumption, high SCFM output, and high stability over temperature and input pressure changes. All these features make the Ronan I/P the best choice for all applications in any industry
More Info PriceRonan -Pressure-to-Current Converters Model X55-300 Series
Ronan -Pressure-to-Current Converters Model X55-300 Series
- Ranges up to 100 psig
- Two or four-wire models
- Fast responding solid-state design
- Detachable electronics with automatic pressure seal
- Insensitive to vibration
- Mounts in any position
- Front accessible zero, span and setpoint adjustments
- Front accessible output monitor testjacks
- Loss-of-air alarm indicator and output signal
- Optional high or low pressure adjustable setpoint
- 3-times maximum rated pressure without damage
Ronan's Series X55-300 P to I converts instrument air pressures to analog current or voltage signals. The two and four-wire models are both available with five common input ranges from 3-15 psig to 0-100 psig. A solid-state sensor assures you of outstanding linearity, negligible hysteresis, very fast response times, and excellent temperature stability.
The electronics portion of our P to I Converter can be removed from the pneumatic base without loss of air pressure. This means you can perform simple calibration and regular maintenance without purging the air lines. Simple to install and maintain, the X55-300 features output monitoring test jacks, a loss-of-air alarm, an adjustable setpoint alarm option, and front access calibration.
Ronan's Series X55-300 P to I Converters provide standard current and voltage signals to instruments and process control computers. Non-standard signal formats are also possible; thereby, eliminating costly interface design requirements for special applications
More Info PriceRonan MARKASINA A?T ?R?N GRUPLARI
.jpg)
