*Snap-action switches, size A

Snap-action switches, size 30 x 10.5 mm (35 x 11 mm). 10 million operating cycles, conventional thermal current up to 10 A. Positive opening operation for the NC contact. Accessories to meet most switching applications. More Info Price

*Snap-action switches, size F

Snap-action switches, size 50 x 12 mm. 10 million operating cycles, conventional thermal current up to 16 A. Positive opening operation for the NC contact. Accessories to meet most switching applications. More Info Price

S870 W1A1 a /TİP A

S870 W1A1 a Snap-action switch, pushbutton (standard ) S870 W1A1 a: Snap-action switch for side mounting onto a mounting plate. Terminal: Screw-type terminals with captive screws (M3) for 1 or 2 wires per terminal Wire cross-section: 0.5 ... 1.5 mm² (AWG 20 ... 16) More Info Price

Schaltbau Snap-Action Switch S826 Series

S826 Series Snap-Action Switch

Schaltbau S826 Series

S826 a
Product code: im-2010-0001

Snap action switch NO+NC contacts

Interchangeable with S800
Self cleaning contacts
Rating - low level to 10A permanent
Failsafe mechanism
Galvanically separate contacts

S826 a 10
Product code: im-2010-0002
Snap action switch NO+NC contacts

S826 a 10 OR
Product code: im-2010-0003
Snap action switch NO+NC contacts

S826 a 10/20 S11
Product code: im-2010-0004
Snap action switch NO+NC contacts

S826 a 10-20
Product code: im-2010-0005
Snap action switch NO+NC contacts

S826 a 10-24
Product code: im-2010-0006
Snap action switch NO+NC contacts

S826 a 10-30
Product code: im-2010-0007
Snap action switch NO+NC contacts

S826 a 20
Product code: im-2010-0008
Snap action switch NO+NC contacts

S826 a 20 L
Product code: im-2010-0009
Snap action switch NO+NC contacts

S826 a 20 S1
Product code: im-2010-0010
Snap action switch NO+NC contacts

S826 a 20 S11
Product code: im-2010-0011
Snap action switch NO+NC contacts

S826 a 20-40
Product code: im-2010-0012
Snap action switch NO+NC contacts

S826 a 20-40L
Product code: im-2010-0013
Snap action switch NO+NC contacts

S826 a 22
Product code: im-2010-0014
Snap action switch NO+NC contacts

S826 a 24
Product code: im-2010-0015
Snap action switch NO+NC contacts

S826 a 30
Product code: im-2010-0016
Snap action switch NO+NC contacts

S826 a 30 L
Product code: im-2010-0017
Snap action switch NO+NC contacts

S826 a 40
Product code: im-2010-0018
Snap action switch NO+NC contacts

S826 a L
Product code: im-2010-0019
Snap action switch NO+NC contacts

S826 a LS
Product code: im-2010-0020
Snap action switch NO+NC contacts

S826 a S11
Product code: im-2010-0021
Snap action switch NO+NC contacts

S826 a S2
Product code: im-2010-0022
Snap action switch NO+NC contacts

S826 as
Product code: im-2010-0023
Snap action switch NO+NC contacts

S826 as 10-30
Product code: im-2010-0024
Snap action switch NO+NC contacts

S826 as 20
Product code: im-2010-0025
Snap action switch NO+NC contacts

S826 as 30
Product code: im-2010-0026
Snap action switch NO+NC contacts

S826 as S11
Product code: im-2010-0027
Snap action switch NO+NC contacts

S826 as20 S11
Product code: im-2010-0028
Snap action switch NO+NC contacts

S826 b
Product code: im-2010-0029
Snap action switch NO+NC contacts

S826 b 10
Product code: im-2010-0030
Snap action switch NO+NC contacts

More Info Price

Snap-action switches, size F

S800 c 20 Snap-action switch, pushbutton with mounting brackets Snap-action switch with pusbutton (standard) and mounting brackets for installation into rectangular cut-outs Flat quick connect terminals 6.3 mm x 0.8 mm Snap-action switch, pushbutton with mounting brackets Technical description Snap-action switch with positive opening operation for the NC contact. The mechanism will break the circuit regardless of spring failure or contact welding due to a short-circuit. Actuator travel Acutator position Dimension X Free position 8.85 mm ± 0.15 mm Operating position 6.60 mm ± 0.35 mm Release position 7.80 mm ± 0.35 mm Total positive opening travel 5.85 mm Total travel 5.65 mm Differential movement (between operating and release pos.) 1.30 mm (typical) Note: *) If the switch is to be operated by a rigid drive shaft or setting, make sure to limit the actuator travel so that it does not fall below dimension x = 5.65 mmm. To ensure the proper working of the positive opening operation it is necessary to depress the actuator to the point of total positive opening travel. However, it must not be squeezed beyond total travel position! Please note our accessories! We also supply variants such as switches with longer roller levers or one-way roller levers with short or long bearing block. In addition to that alternative terminal types as well as reset springs are available. Features Positive opening operation Double break contacts Pushbutton (standard) and mounting brackets Flat quick connect terminals 6.3 mm x 0.8 mm Contact resistance: 10 mΩ typ. Rated impulse withstand voltage Uimp: 4 kV Pollution degree: PD3 Release force: 0.2 N Maximum actuator travel: 3.2 mm Dimensions (L x D x H): 75 x 12 x 37 mm Weight: 24 g Ordering code: S800 c 20 Technical Data Mounting Mounting brackets Auxiliary actuator none Degree of protection contact system IP40 Degree of protection terminals IP00 Contact material Hard silver (AgCu3F40) Contact configuration 1 NC, 1 NO Contact bridge 1 contact bridge Self-cleaning contacts No Conventional thermal current Ith 10 A Utilization category DC 110 V/ 1 A Utilization category AC 230 V/ 3 A Actuating force 3.3 N Contact gap 2 x 1.2 mm Actuating speed 1 mm/sec min. 1 m/sec. max. Terminals Flat quick connect 6.3 x 0.8 mm Mechanical endurance 10 million operating cycles Vibration resistance (at 10 μsec max. opening time) 30g, 10 ... 500 Hz, all directions Shock resistance (at 10 μsec max. opening time) 80g Temperature range -40°C ... +85°C Housing Polycarbonate, light green, transparent More Info Price

Snap-action switches, size F

S800 b 20 Snap-action switch, pushbutton (standard) S800 b 20: Snap-action switch with pusbutton (standard) for side mounting onto a mounting plate Flat quick connect terminals 6.3 mm x 0.8 mm S800 b 20 Snap-action switch, pushbutton (standard) Technical description Snap-action switch with positive opening operation for the NC contact. The mechanism will break the circuit regardless of spring failure or contact welding due to a short-circuit. Actuator travel Acutator position Dimension X Free position 8.85 mm ± 0.15 mm Operating position 6.60 mm ± 0.35 mm Release position 7.80 mm ± 0.35 mm Total positive opening travel 5.85 mm Total travel 5.65 mm Differential movement (between operating and release pos.) 1.30 mm (typical) Note: *) If the switch is to be operated by a rigid drive shaft or setting, make sure to limit the actuator travel so that it does not fall below dimension x = 5.65 mmm. To ensure the proper working of the positive opening operation it is necessary to depress the actuator to the point of total positive opening travel. However, it must not be squeezed beyond total travel position! Please note our accessories! We also supply variants such as switches with longer roller levers or one-way roller levers with short or long bearing block. In addition to that alternative terminal types as well as reset springs are available. Features Positive opening operation Double break contacts Pushbutton (standard) Flat quick connect terminals 6.3 mm x 0.8 mm Contact resistance: 10 mΩ typ. Rated impulse withstand voltage Uimp: 4 kV Pollution degree: PD3 Release force: 0.2 N Maximum actuator travel: 3,2 mm Dimensions (L x D x H): 75 x 12 x 37 mm Weight: 19 g Ordering code: S800 b 20 Technical Data Mounting Side mounting Auxiliary actuator none Degree of protection contact system IP40 Degree of protection terminals IP00 Contact material Hard silver (AgCu3F40) Contact configuration 1 NC, 1 NO Contact bridge 1 contact bridge Self-cleaning contacts No Conventional thermal current Ith 10 A Utilization category DC 110 V/ 1 A Utilization category AC 230 V/ 3 A Actuating force 3.3 N Contact gap 2 x 1.2 mm Actuating speed 1 mm/sec min. 1 m/sec. max. Terminals Flat quick connect 6.3 x 0.8 mm Mechanical endurance 10 million operating cycles Vibration resistance (at 10 μsec max. opening time) 30g, 10 ... 500 Hz, all directions Shock resistance (at 10 μsec max. opening time) 80g Temperature range -40°C ... +85°C Housing Polycarbonate, light green, transparent More Info Price

Snap-action switches, size F

S800 b Snap-action switch, pushbutton (standard) S800 b: Snap-action switch with pusbutton (standard) for side mounting onto a mounting plate. • Terminals: M3 screw with saddle clamp • Wire size: AWG 12 max. (2.75 mm²) S800 b Snap-action switch, pushbutton (standard) Technical description Snap-action switch with positive opening operation for the NC contact. The mechanism will break the circuit regardless of spring failure or contact welding due to a short-circuit. Actuator travel Acutator position Dimension X Free position 8.85 mm ± 0.15 mm Operating position 6.60 mm ± 0.35 mm Release position 7.80 mm ± 0.35 mm Total positive opening travel 5.85 mm Total travel 5.65 mm Differential movement (between operating and release pos.) 1.30 mm (typical) Note: *) If the switch is to be operated by a rigid drive shaft or setting, make sure to limit the actuator travel so that it does not fall below dimension x = 5.65 mmm. To ensure the proper working of the positive opening operation it is necessary to depress the actuator to the point of total positive opening travel. However, it must not be squeezed beyond total travel position! Please note our accessories! We also supply variants such as switches with longer roller levers or one-way roller levers with short or long bearing block. In addition to that alternative terminal types as well as reset springs are available. Features Positive opening operation Double break contacts Pushbutton (standard) Screw-type terminals Contact resistance: 10 mΩ typ. Rated impulse withstand voltage Uimp: 4 kV Pollution degree: PD3 Release force: 0.2 N Maximum actuator travel: 3.2 mm Dimensions (L x D x H): 50 x 12 x 40 mm Weight: 26 g Ordering code: S800 b Technical Data Mounting Side mounting Auxiliary actuator none Degree of protection contact system IP40 Degree of protection terminals IP00 Contact material Hard silver (AgCu3F40) Contact configuration 1 NC, 1 NO Contact bridge 1 contact bridge Self-cleaning contacts No Conventional thermal current Ith 10 A Utilization category DC 110 V/ 1 A Utilization category AC 230 V/ 3 A Actuating force 3.3 N Contact gap 2 x 1.2 mm Actuating speed 1 mm/sec min. 1 m/sec. max. Terminals Screw (M3) with saddle clamp Mechanical endurance 10 million operating cycles Vibration resistance (at 10 μsec max. opening time) 30g, 10 ... 500 Hz, all directions Shock resistance (at 10 μsec max. opening time) 80g Temperature range -40°C ... +85°C Housing Polycarbonate, light green, transparent More Info Price

Snap-action switches, size F

S800 c Snap-action switch, pushbutton with mounting brackets S800 c: Snap-action switch with pusbutton (standard) and mounting brackets for installation into rectangular cut-outs • Terminals: M3 screw with saddle clamp • Wire size: AWG 12 max. (2,75 mm²) More Info Price