D-TEK-LM : Board Type Vehicle Loop Detector

D-TEK-LM Data Sheet

The D-TEK-LM™ is a full fledged plug-in detector that works with many of the Chamberlain operators, like 670, 575, 585 & 595 models. It is a replacement for the Manufacturer original Vehicle Detectors.

The D-TEK-LM ™ may also be used in any location protected from the weather to detect vehicles for annunciation, triggering cameras, lighting, etc. where 24 Volt AC power is provided. Wiring hookup is simplified using the HAR-7 wiring harness.

       Benefits include:

• Easy to install
• Automatic Sensitivity Boost
• Filter prevents cross-traffic
  or RF interference
• Isolation transformer allows operation with poor quality loops

Features

Loop Detector Accessories LD-11, LD-11B and HAR-11

Accessories for Loop Detectors and CarSense 101

Loop Sizes Tech Sheet

Loop install Tech Sheet

Loop Detector Accessory: HAR-11

11 pin detector harness for use with our loop detectors and CarSense 101.

Loop Detector Accessory: LD-11 and LD-11B

DIN Rail mountable 11 pin socket base for use with our loop detectors and CarSense 101.

MVP D-TEK Multi-Voltage Vehicle Detector

MVP D-TEK Data Sheet

The MVP D-TEK® Multi-Voltage Vehicle Detector makes it simple to manage your stock. You only need one detector in your stock room and on your truck. The MVP D-TEK® solves the problem of not knowing which voltage to take for service call or an installation. Reduce the costs of inventory by stocking only one loop detector - with universal voltage.

Benefits include:

• Universal voltage
• Reduced inventory costs
• Operates in both fail safe and fail secure modes
• Reliability

Features

ULTRA D-TEK

Plug in Style Vehicle Loop Detector

Ultra D-TEK Tech Sheet

The Ultra D-TEK was designed to be plug-in compatible with Elite’s OmniControl™ board operators such as the SL3000 and CSW200. The Ultra D-TEK is now compatible with the Viking Loop Detector Rack.

The Ultra D-TEK may be used in the Center, Safety and Exit slots on the operator control board.

Sensitivity selection is simplified by the ULTRAMETER™ display that indicates the appropriate sensitivity setting to detect the vehicle positioned on the loop.

The 10 sensitivity settings allow for finer adjustment of the detection level, while the 4 frequency settings provide greater flexibility in preventing crosstalk in multi-loop applications.

Benefits include:

• Compact design
• Energy efficient
• Easy to install and setup
• Reliable
• Cost effective

Features

Ultra II D-TEK : Vehicle Loop Detector

Ultra-II-D-Tec Tech Sheet

The Ultra II D-TEK Vehicle Loop Detector delivers the features and benefits found in the EMX ULTRA D-TEK to all operator controls that require a dry contact relay input. The Ultra II D-TEK is also designed to plug into the ULTRA II Motherboard.

Sensitivity selection is simplified by the ULTRAMETER™, which displays the appropriate sensitivity setting to detect the vehicle positioned on the loop.

Ten sensitivity settings enable finer adjustment of the detection level. And the four frequency settings provide greater flexibility in preventing crosstalk in multi-loop applications.
 
Benefits include:

• Compact design
• Energy efficient
• Easy to install and setup
• Reliable
• Cost effective

Features

ULTRA II Motherboard

The compact ULTRA II Motherboard allows you to plug in up to three ULTRA II D-TEK units in the same space as two regular detectors. You can place three units into any operator that uses relay inputs to activate.

       Benefits include:

• Quicker installation
• Single power source connection
• Built in input protection on each device
• Easy upgrade or switch out to new devices

EMX is developing additional plug-in access controls to interface with the ULTRA II Motherboard. Watch for future announcements that will extend the capabilities of the ULTRA II Motherboard.

Features

• Compact 4” x 4” size
• Allows for simple plug in of up to 3 ULTRA II detectors
• Surge suppression on all 3 loop inputs
• Individual outputs for each detector
• 12 Pin polarized connector
• Use 3 access control devices in the same space as 2 regular loop detectors

   ULTRA-II Motherboard Data Sheet

Vehicle Loop Detector D-TEK (board only)

D-TEK Board Data Sheet

The D-TEK vehicle loop detector was designed for easy installation and operation. It provides maximum surge protection on all inputs and outputs of the detector.

      Benefits include:

• Easy installation and operation
• Installs into small operator housings
• Reliable with marginal loops
• All inputs and outputs have maximum surge protection
• 4-layer board provides maximum durability and RF blocking
• Full array of features and controls supports variety of applications

Vehicle Loop Detector D-Tek (box only)

D-TEK Box Data Sheet

The D-TEK vehicle loop detector was designed for easy installation and operation. It provides maximum surge protection on all inputs and outputs of the detector.

       Benefits include:

• Easy installation
• Works with small operator housings
• Operates reliably with marginal loops
• Metal housing provides maximum durability and RF blocking
• Array of features and controls supports variety of applications.
• Surge protection

Features

• Loop diagnostics
• Loop isolation transformer
• Loop conditioner
• Aluminum RF shield housing
• Loop frequency counter
• 10 gold plated sensitivity controls
• 8 gold plated function controls
• 6 gold plated controls for frequency, reset & frequency counter
• 2 high intensity LED indicators
• 2 relays pulse or presence
• Optional accessories include PR-Loop,

EMX Lite Loop Sheet

LP-D-TEK : Low Power “Fail Safe”
Vehicle Loop Detector

LP- D-TEK Data Sheet

EMX Industries Inc. designed the LP-D-TEK for applications in which vehicle detection is needed and low power consumption is desired. The LP-D-TEK’s low 9 mA current draw makes it ideal for solar applications, and gate or door operators that require many accessories drawing from the same power supply. The lower current requirement means smaller solar panels are needed, reducing costs.

       Benefits include:

• Low power consumption; ideal for
  solar power applications
• Reduced total cost of ownership
• Operates in both fail safe and fail secure modes

Features