DANOTHERM ALUMINIUM HOUSED COMPACT BRAKE RESISTORS
These resistors are insulated and can easily be mounted in compact constructions. They are specially constructed for high pulse loads compared to the average load. The nominal load can be improved by forced air cooling or by mounting the resistors on a heat sink.
The resistor elements are wirewound on mica support sheets. Lower ohmic values are however made with helix wound elements mounted in a ceramic support part. The outer housing is an aluminium profile isolated with micanite sheets on all inner surfaces. The resistor elements are fixed symmetrical in the profile by the mica construction. This ensures a symmetric expansion of the resistors and a maximum stability to high load impulses. The aluminium profile with the fixed resistor element is filled with quarts sand. This ensures a minimum change of the resistor surface temperature even if the resistor element reaches its maximum temperature during a pulse load. If higher protection classes are required please use our CCR, CBR or CBT resistors. The highest protection class is IP65 / Type 4X, and the power range is up to 6 kW
DANOTHERM CAH/CAV
Nominal load: steady state 55W - 190W
Pulse Load: 40s/120s: 170W - 550W
10s/120s: 500W - 2.3kW
5s/120s: 890W - 4.3kW
1s/120s: 2.5kW - 14 kW
DANOTHERM CBH/CBV
Nominal load: steady state 110W - 330W
Pulse Load: 40s/120s: 330W - 1000W
10s/120s: 1000W - 4.5kW
5s/120s: 1800W - 8.3kW
1s/120s: 5.5kW - 25 kW
.
DANOTHERM CCH
Flat-Pack CCH
Nominal load: steady state 100W - 570W
Pulse Load: 40s/120s: 300W - 1700W
10s/120s: 1000W - 5.7kW
5s/120s: 1.8 kW - 10.2kW
1s/120s: 2.0kW - 11.4kW
.
IP50 - IP65, Silicone free
Best model for mounting on Heat Sinks
DANOTHERM CDH
Flat-Pack CDH
Nominal load: steady state 110W - 205W
Pulse Load: 40s/120s: 330W - 615W
10s/120s: 1.3kW - 2.4kW
5s/120s: 2.5W - 4.9kW
1s/120s: 4.0kW - 8.0kW
DANOTHERM CAR
CAR-The smallest large surface profile
Nominal load:
Cable Conn; Steady state: 100W - 350W
Conn. Box; Steady state: 100W - 335W
Pulse Load, Cable connestions
40s/120s: 280W - 950W
10s/120s: 1.2kW - 4.2kW
5s/120s: 2.3kW - 7.6kW
1s/120s: 7kW - 25 kW
. (Pending)
DANOTHERM ALPHA DIN Rail mounting
Small resistor types from the CAR, CBR and CCR lines can be mounted easily on DIN Rails.
Resistors mounted this way can be used as Dehumidifier Elements
DANOTHERM CBR
CBR-The medium sized large surface profile
Nominal load:
Cable Conn; Steady state: 220W - 1700W
Conn. Box; Steady state: 280W - 1290W
Pulse Load, Cable connestions
40s/120s: 660W - 4.3kW
10s/120s: 2.2kW - 17kW
5s/120s: 4.0kW - 30kW
1s/120s: 13kW - 100kW
IP20, IP50, IP65; Silicone free
DANOTHERM CCR
CCR-The original, medium sized large surface profile
Nominal load:
Cable Conn; Steady State: 185W -1045W
Conn. Box; Steady State: 140W - 790W
Pulse Load, Cable Connestions
40s/120s: 550W - 4.5kW
10s/120s: 1.2kW - 11kW
5s/120s: 2.5kW - 14kW
1s/120s: 4.5kW - 43kW
IP20, IP50, IP65; silicone free.
DANOTHERM CBT
CBT-The most powerful large surface profile
Nominal load:
Cable Conn; Steady State: 500W - 3200W
Conn. Box; single profile:
Steady State: 500W - 3200W
Connector box; two profiles:
Steady State: 2800W - 5500W
Pulse Load, Cable connestions, one profile
40s/120s: 1.25kW - 9.5kW
10s/120s: 4.2kW - 32kW
5s/120s: 7.6kW - 57kW
1s/120s: 25kW - 190kW
.
IP20, IP50, IP65; Silicone free
DANOTHERM CBW
The new type of Water Cooled Brake Resistor combining the advantage of water cooling with the high pulse load ability of the traditional aluminium housed Alpha resistors.
DANOTHERM OEM-ALPHA
Some examples of OEM solutions and modifications of standard products within the Alpha Range are shown here.
DANOTHERM / ALPHA-Aluminum Housed Brake Resistors
DANOTHERM / ALPHA-Aluminum Housed Brake Resistors Ürünleri ile uygun rekabetçi fiyatları almak için müşteri temsilcimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.
DANOTHERM / ALPHA-Aluminum Housed Brake Resistors hakkında daha fazla bilgi için tıklayınız.