Çalışmalarımızdaki en büyük referansımız, geride bıraktığımız başarı dolu
Hızlı Erişim: +90 212 235 95 35 info@imajteknik.com
TREN

SIBONI

SIBONI  AC Brushless

The range of Siboni permanent magnet A.C. Brushless motors was developed internally using the most advanced electromagnetic simulation software available which permitted the properties of the powerful rare earth permanent magnets to be exploited to the full thus producing a series of motors which have a:

- high power / size ratio
- optimum operating performances
- maintain a high constant torque

  SIBONI

SIBONI Precision planetary gearbox

SIBONI S.r.l. produce precision planetary gear reducers, permanent magnet and rare earth D.C. servomotors.
The gear reducers have been developed to be flexible, in that they can be used in different applications.
They are manufactures and assembled using the highest quality processes which ensure the products have the following characteristics:
- Low backlash
- Low noise
- Longevity
- High efficiency
- Small dimensions

The SIBONI reducers are available in 6 dimensions, mono and multistage.
The attributes of the main components are listed below: Crown wheel : Manufactured with the best quality materials such as alloy hardened steel.
Gear : Assembled with roller bearings, honed toothing and the best quality alloy hardened steel for longevity, high efficiency and high torque transmission.
Shaft : Manufactured with the best hardened steel and high dimensional precision for tough applications and best fits.
Bearings : High quality for longevity at high load.
Flange : The out flanges are manufactured with moulded galvanised steel. There is a wide choice of in-line flanges available for coupling to all motor designs.
Lubricant : SIBONI reducers are life lubricated for the temperature range –30° to +90°C.
SIBONI

SIBONI Permanent magnet dc servomotors

The series of dc motors has been developed for servo-motion applications. Ceramic permanent magnet technology allows us to produce a range with an exceptional quality/price ratio , a low moment of inertia and an extremely efficient motion control.

The series is available in many different sizes with torques ranging from 0.03 to 2.5Nm and voltages from 12V to 170V d.c., with the possibility of adding our tachometric dynamo, an encoder or brake to the same shaft.		 SIBONI

SIBONI Rare earth dc servomotors

These motors have been created for those conditions in which a high power rating is required but size is an issue.

Market leading technology has been used in their development and the materials used are of the utmost quality.

The resultant series offers torque from 0.1 to 3.5Nm and a power rating up to a max of 1kW and these motors are ideally suited for use in highly dynamic automation processes.		 SIBONI

SIBONI DC traction motors

The series was developed to maximise efficiency in low voltage applications and in situations where the motors are used intermittently, e.g. electric vehicles. The high inertia and optimised electromagnetic commutation provide a good balance between the dynamic performance and high starting torque which serves to improve the battery life.

There are six sizes of motor in this series and can be supplied with ventilation if required, in 12V, 24V or 48V and with a power rating ranging from 150W to 1.5 kW.		 SIBONI

 

SIBONI

 

 

SIBONI Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile  http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.

SIBONI hakkında daha fazla bilgi için tıklayınız.

Ürünlerini Sattığımız Markalar