Guns, Pumps and Pressure Tanks
Guns, Pumps and Pressure Tanks are the compounds building our Cold Gluing Systems. Our wide variety of products enables us to fulfill different tasks in all areas
The carefully coordinated Xmelt® range includes the new melters as well as temperature controlled hoses and a variety of application guns with brackets and nozzles which suit any requirement. The system’s intelligence makes it possible to optimize the necessary system settings automatically.
We provide Control Units for any kind of application
The Xtend Series includes a modular system for glue control and quality assurance. Its compatibility with all the units in the Compact Series and the C-1100 control modules, secures the use of existing units and modules. An Xtend System consists of a user terminal and a control unit
Cold Glue Pumps
Diaphragm- and piston pumps are, depending on their application, either directly mounted to the tank or to brackets
Smart Piston Pumps
For delivery of medium to high viscosity glues, we recommend piston pumps with pressure ratios from 2:1 to 34:1. Using a closed loop pressure regulator under electronic control, a synchronized glue volume-to-speed balance is assured. Maximum reliability thanks to contact less electronic reversing mechanism. Even filter change is guided step by step on touch screen.
Next generation Baumer hhs smart glue delivery System.
Little or no maintenance: Reliable and robust design for long service life.
Minimum down time: Controller provides simple step by step instructions on pump filter change.
Consistent glue application: Built-in pressure regulator adjusts output pressure proportional to machine speed.
High and uniteruppted glue flow: Non contact electronic switching of reciprocating cycle.
Safety during production: Continuous monitoring of glue pressure and pump operating conditions such as dry run or hose breakage.
For food and tobacco industry: Stainless steel, no use of teflon parts and FDA approved lubrication.
For continual delivery of low to medium viscosity dispersion adhesives under electronic material control, double-membrane diaphragm pumps are ideal
Cold Glue Guns
Ever higher machine speeds demand fast glue systems with higher precision. Electromagnetic Guns from Baumer hhs allow intermittent application at speeds which can no longer be served by conventional mechanical systems. A sealed system reduces setup and maintenance, thus increasing machine output. Non-contact gluing further reduces contamination. Baumer hhs electromagnetic Guns have no moving seals and so are practically wear free and adapted to longitudinal, cross- and dot-gluing
Extremely fast cycling electromagnetic Guns for non-contact application of glue dots. Small footprint with integrated tip sealer which protects the nozzle from drying during stops and a max. cycles rate to 1000 cycles/sec.
Electrical cold glue application gun P-500 for dot and line gluing. The robust glue applicator with extremely high performance reserves guarantee greatest production availability with minimum maintenance. Dot mode allows application of tiny amounts of glue. If more glue is required, optimised Gun flow combined with a maximum glue pressure of 50 bar (725 psi) provides a wide setting range, allowing adjustment of the applied glue amount as required by product and machine speed at any time.
Electromagnetic Guns from Baumer hhs allow intermittent application at speeds which can no longer be served by conventional mechanical systems.
A sealed system reduces setup and maintenance, thus increasing machine output. Non-contact gluing further reduces contamination.
Electro-Pneumatic Glue Guns
Small-footprint glue guns for application pressures up to 24 (348 psi) bars
Heavy duty guns, modulated via differential pistons, for high pressure applications up to 150 bars (2176 psi). Also available in slot-die and spray versions.
For simple, cost effective cold glue supply of low viscosity materials at pressures up to 6 bars (84psi), pressure tanks with 0,75 liters (0.2 gallons) to 12 liters (3.2 gallons) capacities are a reliable solution
Xmelt hot melt units together with heated hoses and guns form a hotmelt application system. The unit melts granules and transports them through the heated hoses to the application heads under pressure. Various tank sizes are available.
You can connect up to 8 Xmelt® hoses.
This technology allows to exchange references and metered values between Xmelt melters, hot-melt hoses and application guns. The melter detects all hoses and heads that are connected. Each one transmits its history and allowed parameters.
Thanks to this informations the Xmelt melter can adapt system parameters such as heating algorithms optimally to the connected heads and hoses. Additionally the InterActive technology supports external communication. You as a user can modify data on your computer and even via the internet. On the other end, Baumer hhs can detect problems online and solve them
Glue Controller XM-820
hot-melt Gun HM-500
Cold Glue Control
2 channel controller for one or two guns. Production speed up to 300 meters/min (984 ft./min). Typical application: spine glued brochures, spot closure of direct mail or signatures, edge gluing for sleeves etc., carton seeling with hot-melt.
4 channel controller for one to four guns. Production speed up to 300 meters/min (984 ft./min). Typical application: spine glued brochures, spot closure of direct mail or signatures, edge gluing for sleeves etc., carton seeling with hot-melt.
The controllers, part of the Xtend series, are the modular and extendable adhesive application controllers for precise glue dispensing on high-speed machines. 4 to 16 channels, max. product speed 1,200 m/min (3937 ft./min). The unit can be fitted with optional Xtend control and monitoring features and a link to the machine's control.
Our Xtend² Series is a modular, integrated system for gluing control and quality assurance. It is compatible and combinable with systems of the Kurandt Compact-Series as well as Baumer hhs controllers. You can use existing devices as well as integrate future quality assurance devices.
The Xtend² system consists of a unit of several individually combined modules and one or more control units, which provide all functions of the glue application systems and quality assurance devices.
Baumer hhs Ürünleri ile uygun rekabetçi fiyatları almak için müşteri temsilcimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.