PSK ELECTRONIC
DIGITAL PANELS 
PSK ELECTRONIC Digital panel meters:
Psk Industrial's Digital Panel meters are suitable for a wide range of display applications.Designed as a low-cost digital panel display they offer ruggedness and reliability, with enough resolution for many voltage,current, or process measurements. Supplied in a standard 1/8 DIN(48mm X 96mm). A full complement of inputs can be specified with DC and AC ranges and current loop,to meet most sensitive and demanding applications featuring total user flexibility for input and display. The DC input indicator, combining this scaling flexibility with 4 and 5 digit resolution, high accuracy 0 - 10V,
4 - 20mA or 0 - 100mV. Scaling and calibrating to engineering unit from the DC input has never been easier.The digital panel meters is aesthetically pleasing. Its straight forward, low-profile design makes it ideal for limited space instruments panels and OEM uses. Wire-up installation is simple via the externally accessible universal screw-type terminal block. For ease of installation, each instrument is supplied with rear-accessible universal screw terminals. Power is derived from 24, 115 or 230V AC; 5, 12, 24 or 48V DC. Whether your application is for straight AC or DC measurement or process measurement from DC transducers,transmitters,signal conditioners or other instrumentation the PSK Digital Panel is the answer
3 Phase monitors:
PSK ELECTRONIC 3 Phase monitors:
wide range of monitoring options. Detection of wrong phase sequence, total absence of one, two or all three phases, more then 20% voltage drops of the nominal voltage in 1 phase.Protection against high-voltage impulses. Adj. range of asymmetry, delay on break 0 - 10s'. Detection loss of neutral or ground. Detection of asymmetry rate 5 - 20% or 7 - 15%. Multi-voltage(3 X 200V AC to 3 X 500V AC). Thermistor motor protection.
Opto:
PSK ELECTRONIC Opto:
The ISO-555 series couplers interface between the process peripherals and electronics components such as it guarantee a reliable isolation and ensure that electrical parameters are linked safety.
The ISO-555 series interface satisfy all safety requirement as well as carry out the different electrical functions.
MONITORS 
PSK ELECTRONIC Monitors:
Psk offers an advanced range of control and protection devices for the protection of electrical networks and equipment.These relays divided to 5 major applications
Level controllers:
Controls maximum and/or minimum level of conductive liquids (tap, water, chemical solutions, ets).
Current monitors:
Monitors a various current ranging for AC or DC current applications.
80mA - 1,5A, 1A - 15A, 1A - 2,000A (using current-transformer with secondary current of 5A f.s.).
Photo-electric switch:
Controls lamps and resistive loads up to 10A. This includes lamps in living rooms, offices, schools, garages and outside lamps.
Voltage control:
Monitors one or three phase network.
Controls dc voltage, under-volt, over-volt.
The units not affected by harmonic distortion.
TIMERS 
PSK ELECTRONIC WIDE RANGE OF ELECTRONIC TIMERS:
Delay on make: RSK SERIES,TSK;
(ON DELAY)
Delay on break: LSK SERIES;
(OFF DELAY)
Flasher(CYCLIC): ISK SERIES;
(SYMMETRIC ) CSK SERIES;
(ASYMMETRIC )
Interval: TDK24, MD;
(SINGLE SHOT ) (Staircase timer);
Pulse Initiated
Interval: WSKI;WSK;
(SINGLE SHOT )
Supply Initiated
Star-Delta Start: SDK-S;SDK20;
GENERATORS
PSK ELECTRONIC Generators:
*Automatic source changeover system controller:
Monitors the three phase sequence and total loss of phase. In case of failure in the mains supply.
SERIES:
GNP-1; GNP-2; GNP-SP; GNP-3.
*Monitoring and shutdown unit for diesel generators:
The GAS10 series has been designed to provide the control for automatic functionality in started generating sets.
On board five LED indicators which give indication of engine status.These are:
*Low oil pressure.
*High engine temperature.
*Start fail.
*Optional alarm 1.
*Optional alarm 2.
DIODE MODULE 
PSK ELECTRONIC Diode modules:
D series
Diodes fulfil the most varied requirements in electrical and electronic control systems. Some examples:
In lamp test circuits and collective fault indicators they are used to collect and decouple arriving signals. For inductive applications such as DC relays, solenoid valves,etc. They are used for arc suppression.
PSK ELECTRONIC
PSK ELECTRONIC Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.
PSK ELECTRONIC hakkında daha fazla bilgi için tıklayınız.