R30 Rotary Position Sensor
Çalışmalarımızdaki en büyük referansımız, geride bıraktığımız başarı dolu
Everight Rotary Position Sensors
Everight Rotary Position Sensors
R30 Rotary Position Sensor
Multi-Mount, Single-Turn
Magnetic Absolute
Rotary Encoder
The Everight Sensors R30 is a flange, clamp, or hub mounted absolute rotary position sensor that reliably provide proportional current or voltage analog output over the sensor’s up to 350° (360° optional w/o field programmability) measuring range while operating in an industrial environment. Based on contactless Hall Effect magnetic sensing technology, the R30 features in-field programmability for span and zero offset, totally eliminating the need for time and effort consuming mechanical or electrical sensor adjustment upon installation. Contactless Hall sensors like the R30 are not subject to wear-out of the sensing element and experience no output signal deterioration over the life of the sensor.
- 360° sensing with 12 bit resolution
- 350° with field program span and zero
- Contactless "infinite life" Hall effect technology
- Multiple analog current, voltage outputs
- Digital and digital network outputs
- Shaft and hub configurations
R30 Specifications
| Operating Specifications | |
| Max Single-turn Measurement Range | 360°; 350° with Field Programmability |
| Resolution (Rotary: Single Turn) | 12 bit |
| Singleturn Total Accuracy | Calibrated ± 0.35° |
| Internal Cycle Time (Single Turn) | < 600 µs |
| Temperature Coefficient | ± 50 ppm |
| Electrical Specifications | |
| Supply Voltage Input | 10-30 V DC |
| Voltage Outputs | 0-5 V, 0-10 V DC |
| Current Outputs | 0-20 mA, 4-20 mA |
| Digital Outputs | SSI, CANopen |
| Current Consumption | 50 mA (typical) |
| Load Resistance (current) | < 500 Ω |
| Load Resistance (voltage) | > 10K Ω |
| Turn-on Time | < 1 s |
| Settling Time | 80 ms |
| Field Programmability | Yes |
| Environmental Specifications | |
| Operating Temperature Range | -40 to +85 °C; +125 °C opt |
| Storage Temperature Range | -40 to +85 °C; +125 °C opt |
| Humidity | 98% RH non-condensing |
| Protection Class (IP rating) | IP65 |
| EMC emit/susc | Susceptibility: EN 61000-6-4 |
| Radiated: EN 6100-2-4 | |
| Shock | EN 60068-2-27, ≤100 g (half sine, 6ms) |
| Permanent Shock | EN 60068-2-29, ≤10 g (half sine, 16ms) |
| Vibration | EN 60068-2-6, ≤10 g (10 to 1000Hz) |
| Mechanical Specifications | |
| Material (Housing) | NI Plated Steel |
| Material (Flange) | Aluminum |
| Material (Shaft) | Stainless Steel |
| Maximum Shaft Loading | Axial 20 N (4.5 lbs) |
| Radial 80N (18 lbs) | |
| Inertia of Rotor | ≤ 20 gcm2 (0.11 oz-in2) |
| Friction Torque at +25 °C | ≤ 2 Ncm (2.8 oz-in) |
| RPM (Continuous Operation) | Max 12000 |
| Shaft Diameter/Hub Shaft Diameter | 6mm (approx. 0.236 in) |
| Mounting Type | Clamp, Flange, Hub (Screw Mount) |
| Connector (Analog Outputs) | M12 5 pin |
R31 Rotary Position Sensor
Multi-Mount, Multi-Turn
Magnetic Absolute
Rotary Encoder
The Everight Sensors R31 is a flange, clamp, or hub mounted absolute rotary position sensor that reliably provide proportional current or voltage analog output over the sensor’s up to 7200° (20 turn "useable") measuring range while operating in an industrial environment. Based on contactless Hall Effect magnetic sensing technology, the R31 features in-field programmability for span and zero offset, totally eliminating the need for time and effort consuming mechanical or electrical sensor adjustment upon installation. Contactless Hall sensors like the R31 are not subject to wear-out of the sensing element and experience no output signal deterioration over the life of the sensor.
R31 Rotary Position Sensor
- 7200° absolute sensing with
12 bit single turn resolution - Patented Wiegand Wire turn count technology
- Contactless "infinite life" Hall effect technology
- Multiple analog current, voltage outputs
- Digital and digital network outputs
- Shaft and hub configurations
| Operating Specifications | |
| Max Single-turn Measurement Range | 360°; 350° with Field Programmability |
| Multi-Turn Default Turns (200B max) | 16 |
| Resolution (Rotary: Single Turn) | 12 bit |
| Singleturn Total Accuracy | Calibrated ± 0.35° |
| Internal Cycle Time (Single Turn) | < 600 µs |
| Temperature Coefficient | ± 50 ppm |
| Electrical Specifications | |
| Supply Voltage Input | 10-30 V DC |
| Voltage Outputs | 0-5 V, 0-10 V DC |
| Current Outputs | 0-20 mA, 4-20 mA |
| Digital Outputs | SSI, CANopen |
| Current Consumption | 50 mA (typical) |
| Load Resistance (current) | < 500 Ω |
| Load Resistance (voltage) | > 10K Ω |
| Turn-on Time | < 1 s |
| Settling Time | 80 ms |
| Field Programmability | Yes |
| Environmental Specifications | |
| Operating Temperature Range | -40 to +85 °C; +125 °C opt |
| Storage Temperature Range | -40 to +85 °C; +125 °C opt |
| Humidity | 98% RH non-condensing |
| Protection Class (IP rating) | IP65 |
| EMC emit/susc | Susceptibility: EN 61000-6-4 |
| Radiated: EN 6100-2-4 | |
| Shock | EN 60068-2-27, ≤100 g (half sine, 6ms) |
| Permanent Shock | EN 60068-2-29, ≤10 g (half sine, 16ms) |
| Vibration | EN 60068-2-6, ≤10 g (10 to 1000Hz) |
| Mechanical Specifications | |
| Material (Housing) | NI Plated Steel |
| Material (Flange) | Aluminum |
| Material (Shaft) | Stainless Steel |
| Maximum Shaft Loading | Axial 20 N (4.5 lbs) |
| Radial 80N (18 lbs) | |
| Inertia of Rotor | ≤ 20 gcm2 (0.11 oz-in2) |
| Friction Torque at +25 °C | ≤ 2 Ncm (2.8 oz-in) |
| RPM (Continuous Operation) | Max 12000 |
| Shaft Diameter/Hub Shaft Diameter | 6mm (approx. 0.236 in) |
| Mounting Type | Clamp, Flange, Hub (Screw Mount) |
| Connector (Analog Outputs) | M12 5 pin |
R32 Rotary Position Sensor
Flange-Mount, IP69K, Single-Turn Magnetic Absolute Rotary Encoder
The Everight Sensors R32 is a robust contactless, single-turn, flange mounted magnetic absolute rotary encoder engineered to provide reliable analog current, voltage, or a variety of digital outputs over the sensor’s up to 360° measuring range (350° with field programmability) while operating in a military/heavy duty automotive environment. Based on contactless, Hall Effect sensing for virtually infinite life, the R32 features 12 bit resolution and unique field programmability for gain and offset, eliminating the need for time consuming physical adjustment upon sensor installation. Contactless sensors such as the R32 are not subject to sensor element wear and therefore experience no output signal deterioration over the sensor's life. The R32 features a mil style connector and is rated for IP69K for heavy duty automotive vehicle undercarriage applications.
R32 Rotary Position Sensor
- 360° sensing with 12 bit resolution
- 350° with field program span and zero
- Contactless "infinite life" Hall effect technology
- Multiple analog current, voltage outputs
- Digital and digital network outputs
- IP69K automotive environmental rating
| Operating Specifications | |
| Max Single-turn Measurement Range | 360°; 350° with Field Programmability |
| Resolution (Rotary: Single Turn) | 12 bit |
| Singleturn Total Accuracy | Calibrated ± 0.35° |
| Internal Cycle Time (Single Turn) | < 600 µs |
| Temperature Coefficient | ± 50 ppm |
| Electrical Specifications | |
| Supply Voltage Input | 10-30 V DC |
| Voltage Outputs | 0-5 V, 0-10 V DC |
| Current Outputs | 0-20 mA, 4-20 mA |
| Digital Outputs | SSI, CANopen |
| Current Consumption | 50 mA (typical) |
| Load Resistance (current) | < 500 Ω |
| Load Resistance (voltage) | > 10K Ω |
| Turn-on Time | < 1 s |
| Settling Time | 80 ms |
| Field Programmability | Yes |
| Environmental Specifications | |
| Operating Temperature Range | -40 to +85 °C; +125 °C opt |
| Storage Temperature Range | -40 to +85 °C; +125 °C opt |
| Humidity | 98% RH non-condensing |
| Protection Class (IP rating) | IP69K |
| EMC emit/susc | Susceptibility: EN 61000-6-4 |
| Radiated: EN 6100-2-4 | |
| Shock | EN 60068-2-27, ≤100 g (half sine, 6ms) |
| Permanent Shock | EN 60068-2-29, ≤10 g (half sine, 16ms) |
| Vibration | EN 60068-2-6, ≤10 g (10 to 1000Hz) |
| Mechanical Specifications | |
| Material (Housing) | NI Plated Steel |
| Material (Flange) | Aluminum |
| Material (Shaft) | Stainless Steel |
| Maximum Shaft Loading | Axial 20 N (4.5 lbs) |
| Radial 80N (18 lbs) | |
| Inertia of Rotor | ≤ 20 gcm2 (0.11 oz-in2) |
| Friction Torque at +25 °C | ≤ 2 Ncm (2.8 oz-in) |
| RPM (Continuous Operation) | Max 12000 |
| Shaft Diameter/Hub Shaft Diameter | 6mm (approx. 0.236 in) |
| Mounting Type | Flange |
| Connector (Analog Outputs) | D38999/20WB5PN |
R33 Rotary Position Sensor
Flange-Mount, IP69K, Multi-Turn Magnetic Absolute Rotary Encoder
The Everight Sensors R33 is a robust contactless, non-mechanical, multi-turn flange mounted magnetic absolute rotary encoder engineered to provide reliable analog current, voltage, or a variety of digital outputs over the sensor’s up to 7200° (20 turn "useable") measuring range while operating in a military/heavy duty automotive environment. Based on contactless Hall Effect sensing and patented Wiegand Wire magnetic absolute turn counting technology (no battery back-up required), the R33 features 12 bit (single turn) resolution and unique field programmability for gain and offset, totally eliminating the need for time consuming precision physical adjustment upon installation. Contactless sensors such as the R33 are not subject to wear of the sensor element and experience no output signal deterioration over the life of the sensor.
R33 Rotary Position Sensor
- 7200° absolute sensing with 12 bit single turn resolution
- Patented Wiegand Wire turn count technology
- Contactless "infinite life" Hall effect technology
- Multiple analog current, voltage outputs
- Digital and digital network outputs
- IP69K automotive environmental rating
| Operating Specifications | |
| Max Single-turn Measurement Range | 360°; 350° with Field Programmability |
| Multi-Turn Default Turns (200B max) | 16 |
| Resolution (Rotary: Single Turn) | 12 bit |
| Singleturn Total Accuracy | Calibrated ± 0.35° |
| Internal Cycle Time (Single Turn) | < 600 µs |
| Temperature Coefficient | ± 50 ppm |
| Electrical Specifications | |
| Supply Voltage Input | |
| Voltage Outputs | 0-5 V, 0-10 V DC |
| Current Outputs | 0-20 mA, 4-20 mA |
| Digital Outputs | SSI, CANopen |
| Current Consumption | 50 mA (typical) |
| Load Resistance (current) | < 500 Ω |
| Load Resistance (voltage) | > 10K Ω |
| Turn-on Time | < 1 s |
| Settling Time | 80 ms |
| Field Programmability | Yes |
| Environmental Specifications | |
| Operating Temperature Range | -40 to +85 °C; +125 °C opt |
| Storage Temperature Range | -40 to +85 °C; +125 °C opt |
| Humidity | 98% RH non-condensing |
| Protection Class (IP rating) | IP69K |
| EMC emit/susc | Susceptibility: EN 61000-6-4 |
| Radiated: EN 6100-2-4 | |
| Shock | EN 60068-2-27, ≤100 g (half sine, 6ms) |
| Permanent Shock | EN 60068-2-29, ≤10 g (half sine, 16ms) |
| Vibration | EN 60068-2-6, ≤10 g (10 to 1000Hz) |
| Mechanical Specifications | |
| Material (Housing) | NI Plated Steel |
| Material (Flange) | Aluminum |
| Material (Shaft) | Stainless Steel |
| Maximum Shaft Loading | Axial 20 N (4.5 lbs) |
| Radial 80N (18 lbs) | |
| Inertia of Rotor | ≤ 20 gcm2 (0.11 oz-in2) |
| Friction Torque at +25 °C | ≤ 2 Ncm (2.8 oz-in) |
| RPM (Continuous Operation) | Max 12000 |
| Weight | |
| Shaft Diameter/Hub Shaft Diameter | 6mm (approx. 0.236 in) |
| Mounting Type | Flange |
| Connector (Analog Outputs) | D38999/20WB5PN |
R34 Rotary Position Sensor
Through-Shaft, Multi-Turn Magnetic Absolute Rotary Encoder
The Everight Sensors R34 is a robust contactless, non-mechanical (sensor), multi-turn 20mm through-shaft, magnetic absolute rotary encoder engineered to provide reliable analog current, voltage, or a variety of digital outputs over the sensor’s up to 7200° (20 turn "useable") measuring range while operating in a military/heavy duty automotive environment. Based on contactless Hall Effect sensing and patented Wiegand Wire magnetic absolute turn counting technology (no battery back-up required), the R34 features 12 bit (single turn) resolution and unique field programmability for gain and offset, totally eliminating the need for time consuming physical adjustment upon installation. Contactless sensors such as the R34 are not subject to wear of the sensor element and experience no output signal deterioration over the life of the sensor.
R34 Rotary Position Sensor
- 7200° absolute sensing with
12 bit single turn resolution - Patented Wiegand Wire turn count technology
- Contactless "infinite life" Hall effect technology
- Multiple analog current, voltage outputs
- Digital and digital network outputs
- 20mm through-shaft offset mechanical design
| Operating Specifications | |
| Max Single-turn Measurement Range | 360°; 350° with Field Programmability |
| Multi-Turn Default Turns (200B max) | 16 |
| Resolution (Rotary: Single Turn) | 12 bit |
| Singleturn Total Accuracy | Calibrated ± 0.35° |
| Internal Cycle Time (Single Turn) | < 600 µs |
| Temperature Coefficient | ± 50 ppm |
| Electrical Specifications | |
| Supply Voltage Input | 10-30 V DC |
| Voltage Outputs | 0-5 V, 0-10 V DC |
| Current Outputs | 0-20 mA, 4-20 mA |
| Digital Outputs | SSI, CANopen |
| Current Consumption | 50 mA (typical) |
| Load Resistance (current) | < 500 Ω |
| Load Resistance (voltage) | > 10K Ω |
| Turn-on Time | < 1 s |
| Settling Time | 80 ms |
| Field Programmability | Yes |
| Environmental Specifications | |
| Operating Temperature Range | -40 to +85 °C; +125 °C opt |
| Storage Temperature Range | -40 to +85 °C; +125 °C opt |
| Humidity | 98% RH non-condensing |
| Protection Class (IP rating) | IP65 |
| EMC emit/susc | Susceptibility: EN 61000-6-4 |
| Radiated: EN 6100-2-4 | |
| Shock | EN 60068-2-27, ≤100 g (half sine, 6ms) |
| Permanent Shock | EN 60068-2-29, ≤10 g (half sine, 16ms) |
| Vibration | EN 60068-2-6, ≤10 g (10 to 1000Hz) |
| Mechanical Specifications | |
| Material (Housing) | NI Plated Steel |
| Material (Flange) | Aluminum |
| Material (Shaft) | Stainless Steel |
| Maximum Shaft Loading | Axial 20 N (4.5 lbs) |
| Radial 80N (18 lbs) | |
| Inertia of Rotor | ≤ 20 gcm2 (0.11 oz-in2) |
| Friction Torque at +25 °C | ≤ 2 Ncm (2.8 oz-in) |
| RPM (Continuous Operation) | Max 12000 |
| Shaft Diameter/Hub Shaft Diameter | 6mm (approx. 0.236 in) |
| Mounting Type | Through-shaft |
| Connector (Analog Outputs) | M12 5 pin |