The Everight Sensors L3 is an extremely robust linear position sensor designed to be embedded in, or port mounted to, a hydraulic cylinder, and reliably provide an analog current or voltage (SSI available as OEM option) output over the sensor’s measuring range while operating in a fluid power environment. Based on Everight’s proprietary, contactless NyceWave™ (DIST) Distributed Impedance Sensing Technology, the L3 employs a unique solid probe construction that is extremely robust when subjected to intense shock and vibration, and only requires a simple conductive tube target (or simply the gun drill ID of the cylinder rod) for operation, rather than a magnet or some other special target type. Contactless sensors such as the L3 are not subject to wear and experience no output signal deterioration over the life of the sensor. Field programmability is available on the L3.
Everight Linear Position Sensors
Everight Linear Position Sensors
Embedded/Port Mounted Linear Cylinder Position Sensor
- Extremely robust construction
- Easily adapts to existing cylinder designs
- High resolution with multiple analog output options
- Senses cylinder rod…no need for magnet or target tube
- Field programmability available
- NyceWave contactless sensing for virtually infinite sensor element life
| Operating Specifications | |
| Measurement Range (linear) | 4 inches - 30 inches (100 mm - 750 mm) |
| Non-linearity | ≤ ± 0.25% FSO, ≤ ± 0.10% FSO optional |
| Noise | 3 mV rms max (Voltage) ≤ 6 µA rms (Current) |
| Frequency Response (-3 dB) | 300 Hz (nominal) |
| Electrical Specifications | |
| Supply Voltage Input | 9 V - 28 V DC ± 2% |
| Voltage Outputs | 0.5 V - 4.5 V, 0.5 V - 9.5V DC |
| Current Outputs | 4-20 mA |
| Digital Outputs | SSI |
| Current Consumption | 50 mA (max) |
| Load Resistance (current) | 550 Ω |
| Load Resistance (voltage) | 2K Ω |
| Field Programmability | Available |
| Environmental Specifications | |
| Operating Temperature Range | -20 to +85 °C, -40 to +125 °C opt |
| Storage Temperature Range | -40 to +105 °C, -40 to +125 °C opt |
| Humidity | 95% RH non-condensing |
| Protection Class (IP rating) | IP67 |
| EMC emit/susc | Susceptibility: EN 61000-6-2 |
| Radiated: EN 61000-6-3 | |
| Shock | 300 gs, 11 ms axial (min); 100 gs, 11 ms radial (min) |
| Vibration | 0.5 in dbl amp sine, 0.1 to 44 Hz; 20 gs, 44 to 2000 Hz |
| Mechanical Specifications | |
| Operating Pressure | 4000 psig max |
| Material (Housing) | Stainless Steel |
| Mounting Type | embed or -8 O-ring port (3/4-16) |
| Connector | M8 3 pin |
L4 Linear Position Sensor
Short Range, Flange Mounted Linear Cylinder Position Sensor
The Everight Sensors L4 Linear Position Sensor is a robust, flange mounted linear position sensor that reliably provides an analog current or voltage (SSI available as OEM option) output over the sensor’s measuring range while operating in an industrial environment. Based on Everight’s proprietary contactless NyceWave Position Sensing technology, the L4 is not subject to wear-out of the sensing element and experiences no output signal deterioration over the life of the sensor. The L4’s spring loaded shaft allows for precision measurement of the linear position of a moving object without the necessity of mechanical attachment. This sensor is also available with a non-spring loaded shaft which may be supplied detached from the sensor and created in a variety of configurations for OEM's.
- Robust construction
- Adapts to multiple popular application types
- High resolution with multiple analog output options
- Spring loaded or free floating target shaft options
- Field programmability available
- NyceWave contactless sensing for virtually infinite sensor element life
| Operating Specifications | |
| Measurement Range (linear) | 0.5 inches - 3 inches (13 mm - 75 mm) |
| Non-linearity | ≤ ± 0.25% FSO, ≤ ± 0.10% FSO optional |
| Noise | 3 mV rms max (Voltage) ≤ 6 µA rms (Current) |
| Frequency Response (-3 dB) | 300 Hz (nominal) |
| Electrical Specifications | |
| Supply Voltage Input | 9 V - 28 V DC ± 2% |
| Voltage Outputs | 0.5 V - 4.5 V, 0.5 V - 9.5V DC |
| Current Outputs | 4-20 mA |
| Digital Outputs | SSI |
| Current Consumption | 50 mA (max) |
| Load Resistance (current) | 550 Ω |
| Load Resistance (voltage) | 2K Ω |
| Field Programmability | Available |
| Environmental Specifications | |
| Operating Temperature Range | -20 to +85 °C, -40 to +125 °C opt |
| Storage Temperature Range | -40 to +105 °C, -40 to +125 °C opt |
| Humidity | 95% RH non-condensing |
| Protection Class (IP rating) | IP65 |
| EMC emit/susc | Susceptibility: EN 61000-6-2 |
| Radiated: EN 61000-6-3 | |
| Shock | 300 gs, 11 ms axial (min); 100 gs, 11 ms radial (min) |
| Vibration | 0.5 in dbl amp sine, 0.1 to 44 Hz; 20 gs, 44 to 2000 Hz |
| Mechanical Specifications | |
| Material (Housing) | Aluminum |
| Material (Flange) | Aluminum |
| Material (Shaft) | Stainless Steel |
| Mounting Type | Flange |
| Connector | M8 3 pin |
L14 Linear Position Sensor
Heavy Duty, Free Standing Linear Position Sensor
The Everight Sensors L14 is an extremely robust free standing linear position sensor designed to provide an analog proportional voltage output over measuring ranges from 50 to 400mm while operating in difficult environments. Based on Everight’s proprietary, contactless NyceWave™ (DIST) Distributed Impedance Sensing Technology, the L14 employs a unique solid probe construction that is extremely tough when subjected to intense shock and vibration, and yet only needs to interact with a plain conductive target tube to operate, rather than a magnet or other special target type. Contactless sensors such as the L14 are not subject to wear and therefore experience no signal output deterioration over the life of the sensor.
- Robust construction
- Minimal stroke to length ratio
- High resolution with multiple analog output options
- Mounts with rod end bearings or clamps
- Field programmability available
- NyceWave contactless sensing for virtually infinite sensor element life
| Operating Specifications | |
| Measurement Range (linear) | 4 inches - 30 inches (100 mm - 750 mm) |
| Non-linearity | ≤ ± 0.25% FSO, ≤ ± 0.10% FSO optional |
| Noise | 3 mV rms max (Voltage) ≤ 6 µA rms (Current) |
| Frequency Response (-3 dB) | 300 Hz (nominal) |
| Electrical Specifications | |
| Supply Voltage Input | 9 V - 28 V DC ± 2% |
| Voltage Outputs | 0.5 V - 4.5 V, 0.5 V - 9.5V DC |
| Current Outputs | 4-20 mA |
| Digital Outputs | SSI |
| Current Consumption | 50 mA (max) |
| Load Resistance (current) | 550 Ω |
| Load Resistance (voltage) | 2K Ω |
| Field Programmability | Available |
| Environmental Specifications | |
| Operating Temperature Range | -20 to +85 °C, -40 to +125 °C opt |
| Storage Temperature Range | -40 to +105 °C, -40 to +125 °C opt |
| Humidity | 95% RH non-condensing |
| Protection Class (IP rating) | IP67 |
| EMC emit/susc | Susceptibility: EN 61000-6-2 |
| Radiated: EN 61000-6-3 | |
| Shock | 300 gs, 11 ms axial (min); 100 gs, 11 ms radial (min) |
| Vibration | 0.5 in dbl amp sine, 0.1 to 44 Hz; 20 gs, 44 to 2000 Hz |
| Mechanical Specifications | |
| Material (Housing) | Aluminum |
| Material (Shaft) | Stainless Steel |
| Mounting Type | Rod eye end |
| Connector | M8 3 pin |
L50 Linear Position Sensor
Clevis Base Mounted
Linear Cylinder
Position Sensor
The Everight Sensors L50 is an extremely robust linear position sensor designed to be mounted between the clevis tines to the base plate of a hydraulic cylinder, and reliably provide a proportional analog output over the sensor’s measuring range (2 to 40 inches) while operating in a heavy duty fluid power environment. Based on Everight’s proprietary, contactless NyceWave™ (DIST) Distributed Impedance Sensing Technology, the L50 employs a unique solid probe construction that is extremely robust when subjected to intense shock and vibration, and only requires a simple conductive tube target (or simply the gun drill ID of the cylinder rod) for operation, rather than a magnet or some other special target type. Contactless sensors such as the L50 are not subject to wear and therefore experience no output signal deterioration over the life of the sensor.
- Extremely robust construction
- Easily adapts to clevis type cylinder end-mounts
- High resolution with multiple analog output options
- Senses cylinder rod…no need for magnet or target tube
- Field programmability available
- NyceWave contactless sensing for virtually infinite sensor element life
| Operating Specifications | |
| Measurement Range (linear) | 4 inches - 30 inches (100 mm - 750 mm) |
| Non-linearity | ≤ ± 0.25% FSO, ≤ ± 0.10% FSO optional |
| Noise | 3 mV rms max (Voltage) ≤ 6 µA rms (Current) |
| Frequency Response (-3 dB) | 300 Hz (nominal) |
| Electrical Specifications | |
| Supply Voltage Input | 9 V - 28 V DC ± 2% |
| Voltage Outputs | 0.5 V - 4.5 V, 0.5 V - 9.5V DC |
| Current Outputs | 4-20 mA |
| Digital Outputs | SSI |
| Current Consumption | 50 mA (max) |
| Load Resistance (current) | 550 Ω |
| Load Resistance (voltage) | 2K Ω |
| Field Programmability | Available |
| Environmental Specifications | |
| Operating Temperature Range | -20 to +85 °C, -40 to +125 °C opt |
| Storage Temperature Range | -40 to +105 °C, -40 to +125 °C opt |
| Humidity | 95% RH non-condensing |
| Protection Class (IP rating) | IP67 |
| EMC emit/susc | Susceptibility: EN 61000-6-2 |
| Radiated: EN 61000-6-3 | |
| Shock | 300 gs, 11 ms axial (min); 100 gs, 11 ms radial (min) |
| Vibration | 0.5 in dbl amp sine, 0.1 to 44 Hz; 20 gs, 44 to 2000 Hz |
| Mechanical Specifications | |
| Operating Pressure | 4000 psig max |
| Material (Housing) | Stainless Steel |
| Mounting Type | Body mount, side O-ring |
| Connector | M8 3 pin |
Everight Linear Position Sensors
Everight Linear Position Sensors Ürünleri ile uygun rekabetçi fiyatları almak için müşteri temsilcimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.