DANOTHERM / TERA Steel Grid Brake Resistors
DANOTHERM / TERA Steel Grid Brake Resistors
TERA
Brake Resistors for medium and very large Drives. These resistors are cooled by air, either natural or forced air cooling
Neutral Grounding Resistors for high voltage power networks.
These resistors are modular and can be assembled to fulfil any requirements of Power.
Power Range: From 3 kW to "X" MW
Protection Degree: IP00 – IP23
Two types of resistor material are aviable:
Type BRC; High Temperature , Low temperature corfficient: Cr,Al,Fe:(Ferritic Stainless Steel EN1-4724)
Type BRD; High Corrisive Resistance, High Temperatur c´Coefficient: Aisi 304.
The following data are valid for EN 1-4724 Resistors
TERA Resistance Blocks
Tera Steel Grid Resistor Blocks Type BRC B / BRD B
can be supplied with up to 30 elements.
Power with 30 elements 15kW Steady state.
TERA IP00
Tera Steel Grid Resistor Blocks with mounting brackets.
Type BRC D / BRD D
Each resistor module has one resistor block
More modules can be connected.
TERA IP20
Tera Steel Grid Resistor Blocks mounted in IP20 housings.
Type BRC F / BRD F
This version is the most economical ready to use version for in door applications.
TERA IP23
Tera Steel Grid Resistor Blocks mounted in IP23 housings.
Type BRC M / BRD M for internal cable connections without cable glands
Type BRC N / BRD N for internal cable connection with cable glands
This version is is for out door mounting i.e. on cranes
DANOTHERM / TERA Steel Grid Brake Resistors Ürünleri ile uygun rekabetçi fiyatları almak için müşteri temsilcimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.
DANOTHERM / TERA Steel Grid Brake Resistors hakkında daha fazla bilgi için tıklayınız.