TAKIKAWA -Controller

Outside Dia. Control System

These units are to control diameter by outputting feed-back signals to extruding machine or winding machine in continuous extruding molding production line.
Among the range, there are DAC-76A(Step delay control type), DAC-86B(PI control type) and DAC+88(Automatic starting-up type).
There is LDM-210C that builds the control unit into the measuring instrument of the LASER DIAMETER. @
Among the range, there is deformed material extruding control system for keeping shape of profile constant of extruding plastic or resin

Outside Dia. Control System

Model	DAC-86B	DAC-76A	DAC+88	LDM-210C (Dia.Control Part)
Control method	P/I/SPEED Control	Step delay Control	Parameter Control	Selected P/I Control or Step delay Control
Automatic starting-up	NG	NG	OK	NG
Applicable Micrometers	All devices which have Analog deviation output		Only LDM-Series	Included LDM
Input kinds	Error input, Line speed input	Error input,	Extruder input, Capstan input	Line speed input
Input isolation	OK	OK	OK	OK
Input range [DCV]	Error: +/-10V Line speed: +10V	Error: +/-10V	Extruder: +10V Capstan: +10V	Line speed: +10V
Input impedance	200k ohm	200k ohm	200k ohm	200k ohm
Error gain setting	NG	10um/V-10mm/V (decade steps)	NG	NG
Output kinds	Control output	Control output	Extruder output, Capstan output	Control output
Output method	Deviation control	Deviation control	Absolute control	Deviation control
Output isolation	OK	OK	OK	OK
Output range	DC+/-10V	DC+/-10V	DC+/-10V	DC+10V (Ext./Cap. each)
Max. current	DC+/-20mA	DC+/-20mA	DC+10mA (Ext./Cap. each)	DC+/-20mA
Output impedance	less than 6 ohm	less than 6 ohm	less than 10 ohm (Ext./Cap. each)	less than 6 ohm
Output limit setting	OK	OK	OK	OK
Setting items	P,I	Alarm,P	System data(11items)[*1] Work data(12items)	P,I or P,Speed voltage,Distance
Programing function	NG	NG	OK (100 kinds)	NG
Operation button	MANU/AUTO /RESET	MANU/AUTO /RESET	MANU/AUTO/UP/DOWN	MANU/AUTO
External remote input	OK	OK	OK	OK
Pulse signal of length	Unnecessary	Necessary	Unnecessary	Unnecessary
Main display	Output display by LED bargraph	Output display by analog meter	Operation state display by LCD	Output display by LED bargraph
RS-232C	OK	NG	OK	OK
Tacho-generator input	NG	OK	NG	NG
Power supply	AC100-240V 50/60Hz Free power supply
Power consumption	less than 8VA	less than 15VA	less than 10VA	less than 20VA
Ambient condition	Temperature:0-45 degree centigrade, Humidity:30-85%(No condensation)
Outside dimension W * H * D[mm]	144 * 72 * 191	350 * 99 * 331	144 * 72 * 191	144 * 72 * 241
Weight	Approx. 1.5kg	Approx. 3kg	Approx. 1.7kg	Approx. 1.8kg

[*1]Those data are backed up by battery, and not necessary to set for each product.

Defromed material extruding control system Specificaion

Summary	This system is for keeping shape of profile constant through direct compensation/control of extruding machine or drawing machine by measuring in Non-contact method a discrepancy from standard value of profile to be extruded with a detecting head to be set just behind extruding machine at the time when extruding plastic or resin.
Edge sensor	Sensing method	Non-contact/Infrared optical fiber sensing
PRF-10H PRF-40H	Measuring range	1mm * 20mm(PRF-10H), 4mm * 20mm(PRF-40H)
	Resolution	+/-1um
	Accuracy	+/-5um
	Operation temperature	Max. 300 degree centigrade
	Outside dimension	360(W) * 45(H) * 20(D)[mm]
	Weight	400g
Controller	Deviation indicator	Analog meter +/-0.5mm(PRF=10H), +/-2mm(PRF-40H)
PRF-93	Deviation output	DC voltage(Range: -4V to +4V) 4V/0.5mm(PRF-10H)A4V/2mm(PRF-40H)
	High/Low limit output	Muti-level setting available, Contact output 250V 1A
	Power supply	AC100`240V 50/60Hz 10VA
	Outside dimention	144(W) * 72(H) * 191(D)[mm]
	Weight	1.5kg
Control unit		DAC-86B(See Spec. of DAC-86B)
Sensor mounting metals		Option
PRF-93@@@@
PRF-10H@@@
PEF-40H@@@

TRAVERSE CONTROLLER

TRAVERSE CONTROLLER (TRC-10)
This is a device to control Traverse motion of Winding drum.
This device is to output Traverse speed voltage in proportion to its pulse
frequency number through receiving a rotation pulse of winding drum

Specifications

Type	Traverse Controller
Model	TRC-10
Summary	This controller can control traverse motion when widing up cables to cable drum. Control output is proportional voltage to widing up speed.
Display	Position/Setting, State(RUN/WAIT), Direction
Data setting	Drum width, Pitch, Stop angle, Max. speed, Pulse rate, Output fine adjustment
Volume setting	Wide movement value, Frame movement value
Pulse input	A/B Phase(0.01 - 50kHz), Single phase pulse available, DC+12V[Max.40mA] Power supply avaelable
Extrenal input	Quick feed, Wide movement, Position reset, Frame movement, Emergency stop, Turn, Normal traverse, Reverse traverse start
Traverse output	Max.+/-10VDC(Resolution : 12 bits)
Fixed voltage output	+/-10VDC 2 channel, DC0 - +10V 2 channel (Adjustable by volume at rear panel)
Contact output	A direction, B direction AC250V/DC30V 10A DC30V (Resistance load)
Power supply	AC100 - 240V 50/60Hz 5VA
Ambient condition	Temperature:0 - 45degree centigrade, Humidity:35 - 85%RH(No condensation)
Outside dimension	144(W) * 72(H) * 191(D)[mm]
Weight	Approx. 1.5kg

PRESET CONTROL COUNTER

Preset Control Counter (PR-06)
PR-06 is 6-digit up/down counter for production line that is
available to set Preset-1(Forecasted value) as deviation from
full value, and Preset-1 value can be controled by line speed

Specifications

Type	Preset Control Counter
Model	PR-06
Summary	PR-06 is 6-digit up/down counter for production line that is available to set Preset-1(Forecasted value) as deviation from full value, and Preset-1 value can be controled by line speed.
Method	Double preset type up/down counter
Display	6-digt 7-segment LED, Zero suppressed
Preset-1	Forecasted value:4-digit setting(Setting deviation from full value), Contact/Non-contact output available
Preset-2	Full value:4-digit setting, Contact/Non-contact output available
Contact output	DC30V/AC250V 1A(Resistance load), Delay:Less than 20msec
Non-contact output	Open-collector output(Max.35V 50mA Negativ logic), Delay:Less than 10msec
Output function	One shot or Hold(Cancel by reset)
Pulse input	A/B phase, Single phase pulse available, Driving current:More than 5mA, DC+12V(50mA) Power supply available
Max. frequency	30cps/2kcps(alternative), Duty 1:1
Manual reset	From push switch on front panel(More than 50msec)
External reset	Short-circuited terminal(More than 50msec)
Inhibit input	Short-circuited terminal or 'L' level input to terminal (Recovery time: Less than 590usec)
Power supply	AC100V/200V 50/60Hz 10VA
Ambient condition	Temperature:-10 - 45degree centigrade, Humidity:35 - 85%RH(No condensation)
Outside dimension	144(W) * 72(H) * 138(D)[mm]
Weight	Approx. 1kg

Reverse Detector OM Series

Reverse Detector (OM-01)
This detector can output alarm by detecting reverse motion of winding direction in winding system and can be installed on DIN rail.

A/B Phase Divider (OM-02)
This device is to obtain 1/10 and 1/100 deviding output of single phase or A/B phase input pulse and can be installed on DIN rail.

2-Channels Distributor (OM-03)
This device has 2 channel input and 5 output for each pulse input and can be installed on DIN rail.

Specifications

Type	Reverse Detector
Model	OM-01
Summary	This detector can output alarm by detecting reverse motion of winding direction in winding system and can be installed on DIN rail.
Power supply	DC+12V/0.5A(Changeable by option)
Reverse count Setting	3-digit digital switch
Contact output	1-a contact, 590ms one shot, AC240V 1A(Resistance load)
Pulse input	A/B phase pulse
Max. frequency	5kHz(Changeable by option)
Display	Power on LED and Reverse detecting LED
Inhibit input	Short-circuited terminal or 'L' level input to terminal (DC5V/CMOS level)
Outside dimension	100(W) * 70(H) * 112(D)[mm], Installing on DIN rail available

Type	A/B Phase Divider
Model	OM-02
Summary	This device is to obtain 1/10 and 1/100 deviding output of single phase or A/B phase input pulse and can be installed on DIN rail.
Power supply	DC+12V/0.5A(Changeable by option)
Dividing ratio	1/10 and 1/100
Output	Open collector output
Pulse input	A/B phase pulse
Max. frequency	10kHz(Changeable by option)
Single/2 phase changing	Changing by jumper on internal PCB
Outside dimension	100(W) * 70(H) * 112(D)[mm], Installing on DIN rail available

Type	2-Channels Distributor
Model	OM-03
Summary	This device has 2 channel input and 5 output for each pulse input and can be installed on DIN rail.
Power supply	DC+12V/0.5A(Changeable by option)
Input	2 channels(Pulled-up by 4.7kohm resistances)
Output	5-outputs/1-channel(Open collector output)
Max. frequency	10kHz(Changeable by option)
Outside dimension	100(W) * 70(H) * 112(D)[mm], Installing on DIN rail available

Changeable Constant Current Source

Changeable Constant Current Source (VI-101,102)
Special power source to control brake or clutch by input voltage in production line.

Type	Changeable Constant Current Source
Model	VI-101	VI-102
Summary	Special power source to control brake or clutch by input voltage in production line.
Input voltage	DC 0 - +10V
Output current	DC0 - 1A(Changeable range:0.1 - 1A), Ripple:Max. 0.5%	DC0 - 2A(Changeable range:0.2 - 2A), Ripple:Max. 0.5%
Max. output voltage	DC+25V	DC+28V
Withstand voltage (in-out)	+/-2000Vp
Circuit type	Serial CMOS Power transistors circuit
Power supply	AC200V(AC100V available by option) 50/60Hz 30VA	AC200V(AC100V available by option) 50/60Hz 60VA
Operation temperature	-5 - 50 degree centigrade
Outside dimension	130(W) * 85(H) * 102(D)[mm]		180(W) * 144(H) * 84(D)[mm]
Weight	1.0kg		1.5kg

TAKIKAWA -Controller

TAKIKAWA -Controller Ürünleri ile uygun rekabetçi fiyaları almak için müşteri temsilçimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.

TAKIKAWA -Controller hakkında daha fazla bilgi için tıklayınız.

TAKIKAWA -Controller

Specifications

Specifications

Specifications

Ürünlerini Sattığımız Markalar