HARDY INSTRUMENTS
HARDY INSTRUMENTS Tension load cell Hardy Instruments
MB Series Tension Sensors
The MB Series of load cells uses an LVDT type sensor to convert tension into a proportional electrical signal.The LVDT system provides precise, accurate tension measurement while the mechanical design allows for extremely high overloads without damage to the unit
Features
- Extremely accurate LVDT type sensor
- Mountable at any angle
- Suitable for either symmetrical or asymmetrical web path angles
- Capable of taking extreme overloads without structural damage or loss of calibration
- Simplified mechanical structure
- No calibration or maintenance required
HARDY INSTRUMENTS Weighing controller Hardy Instruments
HI 4050 Weight Controller
This weight controller / weight indicator acts as a front end to a PLC, PC or DCS system for most weighing applications, or as a stand-alone for simple control or weight monitoring.
Modularity – Configure the HI 4050 weight controller to suit your applications:
- Specify it with or without a display
- Choose either AC or DC power
- Add some Digital I/O
- Select a communication network: Analog, DeviceNet, EtherNet/IP, Allen-Bradley Remote I/O, Profibus, or Modbus TCP/IP
- Choose between a panel/remote mount and a DIN rail mount. With a display, you choose either to panel mount the entire assembly, or to mount the controller housing assembly remotely.
Ease of Installation: Installation is easy, with no special tools or expertise required. Just drill five to nine standard holes in your panel, and attach the front panel keyboard display. There is no rectangular cutout required. The controller housing can be attached to the rear of the panel or remotely up to 100 feet away to a DIN rail. Need to replace an HI 2151/30WC or HI 2110WI? Just drill four holes and plug the HI 4050 controller in.
HARDY INSTRUMENTS Vibration monitoring system Hardy Instruments
HI 3600 Machine Monitor
Full Functionality:
- Vibration Monitoring: Vibration can be monitored through acceleration, velocity, and displacement measurement, with customizable filtering. The HI 3600 will accommodate whatever sensing mechanism and monitoring range is best suited for you and your applications, regardless of whether it involves probes, accelerometers, or high/low frequencies.
- Impact Measurement: for reciprocating motion issues such as mechanical looseness or detonation: While many equipment issues can be monitored using vibration monitoring, impact measurement will call attention to impact or shock related issues that are often times hidden using typical vibration monitoring technologies.
- Rod Drop Monitoring: Rod drop monitoring is a capabilitiy used to measure the wear and tear on rider bands, rings, and seals for reciprocating engines and compressors.
- Expansion Channels: With an Additional 16 Channels, you can monitor any parameter in the process (such as temperature, KW Load, or position), tying them into the 3600 Machine Monitor.
Full Connectivity:
The HI 3600 uses the Hardy-Links Connectivity structure of the 3000 Controllers to allow you to connect to your process from anywhere.
- Hardy Web-Link is an embedded webserver that enables local or remote access to your condition monitoring system.
- Hardy e-Link is an electronic mail feature that enables your machine to a) notify you of alarms, or b) receive a customized equipment performance report. These emails can be sent to PC's, cell phones, or to pagers.
- Hardy PDA-Link allows you to access all aspects of your 3600 Machine Monitor using the IR Port on your Palm PDA.
HARDY INSTRUMENTS Accelerometer Hardy Instruments
Hardy Instruments offers a full line of industrial grade accelerometers for measuring vibration on typical plant machinery. These accelerometers are in stainless steel housings to withstand harsh environments. They are isolated from ground and are protected against RF noise by an inner shield.
Typically, Hardy accelerometers have 2-pin MS style connectors, which adds to their ruggedness, and can be supplied with watertight mating connectors and cables
HARDY INSTRUMENTS Portable vibration unit Hardy Instruments
HI 803 Portable Vibration Shaker
Top-of-the-line portable shaker for transducer / accelerometer vibration, verification and calibration
In a manual mode, the vibration test level and the test frequency can be set from 10 Hz to 10,000 Hz. In a sensitivity mode, the DI 803 not only vibrates the transducer being tested, but also measures its output and calculates its output sensitivity (mV/unit of motion). A built-in display reads the output sensitivity which can be stored in memory as well. Complete testing sequences and data can be stored in memory for each sensor being tested. A built-in printer logs this data on the spot or later from stored data. An RS-232 port and data transfer program are standard. ASCI II test data files can be transferred to a computer for use with most spreadsheet programs. For testing of heavy transducers or for testing at high frequencies, the DI 803 automatically corrects the sensitivity calculation for the effects of transducer mass loading. It also measures and displays transducer phase, which is important for balancing applications.
A built-in self-test program checks for accuracy of all calculations. Standard accessories include two mounting plates, a variety of threaded adapters, and general cables (for the sensitivity mode). Operating voltage (120 or 240 Vac) for the built-in charger must be specified
HARDY INSTRUMENTS Pneumatic multi-disc brake Hardy Instruments
S/T Series Pneumatic Brakes
Hardy's new advanced series tension brakes provide dependable, long-lasting torque for your unwind applications. The high thermal output and torque ratings of the advanced series make these units ideal for demanding tension operations. Because every application is different, we offer a full range of sizes to meet all your unique specification requirements
features:
- Split facing for easy replacement and low maintenance costs
- High temperature o-rings
- High temperature bearing
- Brake safety guard for operator safety
HARDY INSTRUMENTS
HARDY INSTRUMENTS Ürünleri ile uygun rekabetçi fiyatları almak için müşteri temsilcimiz ile http://www.imajteknik.com.tr/bize-ulasin veya Fiyat teklifi formunu doldurarak mesaj bırakmanız halinde satış muhendislerimiz en kısa zamanda sizinle irtibat kuracaklardır.
HARDY INSTRUMENTS hakkında daha fazla bilgi için tıklayınız.