The Model 15T or 15H offers a high performance feedback solution in a low profile package. This thru-bore(T) or hollow bore(H) encoder will easily mount over shaft sizes up to 10 mm in diameter. Unlike modular or kit encoders, the Model 15 utilizes an integral bearing set, and an innovative flexible mounting system which is much more tolerant to axial misalignment or radial shaft run-out. The slotted flex mount provides 30 degrees of rotational adjustment for commutation or index pulse timing. Installation is quick and easy! For brushless servo mount motor applications, the Model 15 can be specified with three 120° electrical phase tracks to provide up to 12 pole commutation feedback. The optional 120° C temperature capability allows servo motors to operate at higher power outputs and duty cycles. The Model 15 provides stable and reliable operation and is an excellent replacement for other manufacturers modular encoders where a high performance solution is desired. For more detailed information and specifications on the Series 15T product, click the download link below.

Download Datasheet

Introducing the next generation of high performance encoders - the Model 25T. As contemporary as its appearance, the Model 25T features the largest thru-bore available in a 63.50mm encoder, mounting directly on shafts as large as 28 mm. With resolutions of up to 10,000 PPR, and Frequencies of up to 1MHz this industrial strength encoder is perfect for fast revving motors. The 25T features the next generation of proprietary Opto-ASIC sensor which provides superior accuracy and precision counts. The injection molded housing, made from a blend of nylon composites, is grooved with "cooling fins" and can take the extreme heat of the motion control industry. With sealing available of up to IP65 and many new rugged flexible mounting options, the Model 25T can perform in demanding industrial environments.

Download Datasheet

The Model 755HS Size 15 is ideal for applications requiring a small, high precision, high performance encoder. Approximately 40.00mm in diameter and 40.00mm long, it will fit where many encoders cannot. All metal construction and shielded ball bearings provides years of trouble-free use. A variety of blind hollow bore sizes are available, allowing for shafts up to 10 mm. Attaching directly to a motor is quick and simple with the innovative flex mount, first developed by BECo. This industry standard mount eliminates couplings, increases reliability, while reducing overall length and cost. Where critical alignment is required, a Slotted Flex (SF) is also available. For more detailed information and specifications on the Series 755HS product, click the download link below.

Download Datasheet

The Model 775 Slim Thru-bore encoder is designed to fit directly either on a motor shaft or other shafts where position, direction, or velocity information is needed. The Model 775 is available in large bore sizes to 35.00mm. The Model 775 features a collet type mounting clamp for bore sizes to 25.40mm and a single-screw clamp type mounting for bore sizes to 35.00mm. An optional anti-rotation flex mount maintains housing stability. Long disk life is assured by the rugged, shock resistant code disk. Electrical features include standard line driver (5-24 VDC), open collector, pull-up resistor, and push-pull output circuits; over voltage protection, and optional 100 degrees centigrade operating temperature. Electrical connections are made by a 2M cable. For more detailed information and specifications on the Series 775 product, click the download link below.

Download Datasheet

The Model 776 Large Bore Thru-bore encoder is designed to fit directly either on a motor shaft or other shafts where position, direction, or velocity information is needed. The Model 776 is available in large bore sizes to 47.625mm. The Model 776 features a single-screw clamp type mounting. An optional anti-rotation flex mount maintains housing stability. Long disk life is assured by the rugged, shock resistant code disk. Electrical features include standard line driver (5-24 VDC), open collector, pull-up resistor, and push-pull output circuits; over voltage protection, and optional 100 degrees centigrade operating temperature. Electrical connections are made with a 2M cable.

For more detailed information and specifications on the Series 776 product, click the download link below

Model 776.pdf

The Model’s larger bore (up to 15.875mm) and low profile makes it a perfect solution for many machine and motor applications. Available in two distinct formats - a Hollow Bore and a complete Thru-Bore - the Model 260 uses BECo’s innovative anti-backlash mounting system, allowing simple, reliable, and precise encoder attachment. Unlike traditional kit or modular encoder designs, it's integral bearing set provides stable and consistent operation without concerns for axial or radial shaft runout. For brushless servo motor applications, the Model 260 can be specified with three 120° electrical phase tracks to provide up to 12 pole commutation feedback. The optional extended temperature capability allows servo motors to operate at higher power outputs and duty cycles. For more detailed information and specifications on the Series 260 product, click the download link below.

Model 260.pdf

The 760N encoder is configured with either a full thru-bore (which may be fixed at either end of the shaft), or with a blind bore which uses the front shaft fixing only. The encoder body is prevented from rotation by means of either TWO flexible mountings, or by ONE SINGLE adjustable radius fixing, both of which compensate for minor mis-alignment of the host shaft. The 760N may now be configured with commutation signals for use with Brushless Motors. For more detailed information and specifications on the Series 760 product, click the download link below

Model 760.pdf