KEL-2 Insulator・Electrobe-holding・amplifier Applicable to any site if the measuring material (sand for building material, gravel, crushed stones etc.) contains some moisture. Standard model does not include detection probe. We provide it as option. Easy sensitivity setting by turning the dial. ,1,100,1,kel-2-insulator-electrobe-holding-amplifier,,2020-06-25 00:45:00,,9139,0,,0,, KEL-2 Insulator・Electrobe-holding・amplifier, [5066] Leak Type Level Switch KEL-2, Operating Principles A measured substance that contains moisture to some extent is constantly made contact with the electrode. When the resistance between the electrode and the metal tank wall is reduced, the change of the resistance is detected and the output contact is switched. When the measured substance passes over, the output contact is restored to the initial state. , Model KEL-2 Power Source 105/210VAC ±10% 50/60Hz Output Contact SPDTx1 Contact Capacity AC250V 5A、DC30V 5A Temperature 0～+50℃（No Condensation or Freez required） Detecting Sensitivity Max.about 10MΩ – Min.about 30kΩ Sensitivity Setting 16 Steps adjustable between Max. and Min. ,,kel-2-insulator-electrobe-holding-amplifier-5051-conveyor-peripherals-kel-2-insulator-electrobe-holding-amplifier-applicable-to-any-site-if-the-measuring-material-sand-for-building-material-gravel-crushed-stones-etc-contains-some-moisture-standard-model-does-not-include-detection-probe-we-provide-it-as-option-easy-sensitivity-setting-by-turning-the-dial-table-border-1-cellpadding-0-cellspacing-0-style-width-650px-width-690- -tbody- -tr- -td-style-width-90px- -p-model-p- -td- -td-style-width-276px- -p-kel-2-p- -td- -tr- -tr- -td-style-width-90px- -p-power-source-p- -td- -td- -p-105-210vac-plusmn-10-50-60hz-p- -td- -tr- -tr- -td-style-width-90px- -p-output-contact-p- -td- -td- -p-spdtx1-p- -td- -tr- -tr- -td-style-width-90px- -p-contact-capacity-p- -td- -td- -p-ac250v-5a-dc30v-5a-p- -td- -tr- -tr- -td-style-width-90px- -p-temperature-p- -td- -td- -p-0-50-no-condensation-or-freez-required-p- -td- -tr- -tr- -td-style-width-90px- -p-detecting-sensitivity-p- -td- -td- -p-max-about-10m-omega-ndash-min-about-30k-omega-p- -td- -tr- -tr- -td-style-width-90px- -p-sensitivity-setting-p- -td- -td- -p-16-steps-adjustable-between-max-and-min-p- -td- -tr- -tbody- -table- ,1012,0,KEL-2 Insulator・Electrobe-holding・amplifier
