Greatest reference in our business is our successful past
Quick Access: +90 212 235 95 35 info@imajteknik.com
TREN

Actuators

Resim Yok
Actuators
905 Large ActuatorModel 903-01
Moog Components Group designs, develops, qualifies and manufactures rotary and linear actuators for demanding commercial applications and military aircraft, target drones, and unmanned air, land and sea vehicles. We also manufacture pan and tilt servo assemblies for military security applications and rotary transducer modules that convert mechanical shaft motion into electrical signals.
Brushless Rotary Actuators & Transconductance Drive Amplifiers
Rotary Position Transmitter & Switch Modules
Rotary Servo Actuators
Amplifiers
Actuator Application Form
 
Linear Actuators
Linear actuators translate rotary motion to linear motion. They embody the same features and similar applications as rotary units.
Back to Top
Model /
Data Sheet
Outline Drwg
CAD
Drawing
No Load
Speed
Power
Point
Peak
Force
Stroke
Power
About
(mouse over photo)
310-01
.pdf
3D
Model
0.6
in/sec
300 lbs
@.45 in/sec
1,000
lbs
3 in
28
VDC
This linear actuator was designed to control the cycle and collective feel on a helicopter.
801/973
-
3D
Model
-

801
185 lb @ 1.60 in-sec
973
350 lb @ 1.50 in/sec

185 lbs
rated
1120 lbs
peak
801
4.78 in

973
4.50 in
28
VDC
Used to position the pitch of the rotor blades on a tilt rotor unmanned aerial vehicle.
802
-
3D
Model
-
800 lb @ 0.75 in/sec
800
lbs
11.0 in
28
VDC
Used to position the nacelles on a tilt rotor unmanned vehicle during flight conversion modes.
974
-
3D
Model
0.87
in-sec
1500 lb @
0.26 in/sec
1500
lbs
rated
7.25 in
28
VDC
Used to position the nacelles on a tilt rotor unmanned vehicle during flight conversion modes.
 
Brushless Rotary Actuators and Transconductance Drive Amplifiers
These actuators are used for control of an aircraft's night vision targeting system. The Samarium Cobalt PMDC brushless motor with its Hall communication and high stiffness planetary spur gearing, delivers high torque and continuous rotary motion at its anti-backlash output shaft.
Model /
Data Sheet
Outline
Drwg.
CAD Drawing
No Load
Speed
Power
Point
Peak
Force
Stroke
Power
About
(mouse over photo)
-f
3D
Model
45 rpm
320 in-lbs
@ 25 rpm
320
in-lbs
rated
Cont.
Rotation
28
VDC
Antenna azimuth drive servo actuator for airborne radar applications including scan and sector modes.
3D
Model
660
rpm
40 in-lb @ 621 rpm
135
in-lbs
Cont.
Rotation
150
VDC
Used to control the rotational function of an aircraft's night vision targeting system. The actuator incorporates a 1 & 16 speed resolver. The 28 VDC brake restricts shaft motion during power off conditions. Actuator torque output is controlled by amplifier Model 871-01.
3D
Model
790
rpm
12 in-lb @ 660 rpm
30
in-lbs
Cont.
Rotation.
150
VDC
Used to control the de-rotational function of the aircraft's night vision targeting systems. It incorporated a 1 speed resolver and an AC tachometer for rate servo compensation. Actuator torque output is controlled by amplifier mode 871-01.
3D
Model
320
rpm
21 in-lb @ 230 rpm
46
in-lbs
Cont.
Rotation.
150
VDC
Used to control the shroud function of the aircraft's night vision targeting system. It incorporates a 1 speed resolver and the 28 VDC brake restricts shaft motion during power off conditions. Actuator torque output is controlled by amplifier Model 944-02.
3D
Model
960
rpm
32 oz-in @ 960 rpm
-
Cont.
Rotation
115 VRMs
Our military qualified Model 917 Rotary Brushless Actuator is an azimuth drive servo for an airborne rate and position antenna system. The Model 918 Servo Actuator provides the pitch-roll-yaw functioning for this system.
3D
Model
300
rpm
5.8 oz-in @ 300 rpm
-
+/-3600°
20
VDC
Our military qualified Model 918 Rotary Brushless Stepper Actuator controls the pitch-roll-yaw function of an antenna system in conjunction with the Model 917 azimuth drives.
3D
Model
180 deg/sec
350 in-lbs
@120 deg/sec
600
in-lbs
+/-46°
20
VDC
Rotary servo actuator used to position the control surfaces plus utility applications of unmanned vehicles.
-
3D
Model
312 rpm
165 in-lbs
@231 rpm
165
in-lbs
rated
Cont.
Rotation
270
VDC
Rotary brushless actuator is qualified for airborne applications to control the rotation function of the aircraft's targeting system.
-
3D
Model
40 rpm
750 in-lbs
@ 30 rpm
1100
in-lbs
Cont.
Rotation
270
VDC
Our Model 961 Rotary Actuator in conjunction with the Model 962 Transconductance Amplifier may be used for the antenna's azimuth and elevation rotary function, or similar high torque applications.
-
3D
Model
87 deg/sec
2200 in-lbs
@35 deg/sec
2,500
in-lbs
+/-45°
28
VDC
Our Model 965-01 Rotary Servo Actuator is used to position the control surfaces of a Unmanned Air Vehicle (UAV), and is designed to operate under extreme conditions.
-
3D
Model
-
0.6 rpm
@ 15 in-lbs
200
in-lbs
+/-30°
28
VDC
Limited rotation trim actuator for the military helicopter.
-
3D
Model
230 rpm
controller limited
168 in-lbs @ 183 rpm
-
Cont.
Rotation
-
Rotary brushless actuator system is an antenna azimuth drive servo actuator system consisting of the actuator motor/gearhead, seperate controller and interconnecting cables. Used for ground vehicle radar applications in full and sector scan modes.
-
3D
Model
110 deg/sec
200 in-lbs
@ 96deg/sec
205
in-lbs
+/-120°
28
VDC
Our Model 993-01 Rotary Servo Actuator provides mechanical valve control of the aircraft's hydraulic flight control surfaces.
-
3D
Model
80 deg/sec
60 in-lbs
@
60 deg/sec
70
in-lbs
+/-21°
28
VDC
Our 995-01 Rotary Servo Actuator provides mechanical control for the aircraft's Rudder Yaw dampening function during autopilot engagement.
f-
3D
Model
33 deg/sec
210 in-lbs @ 30 deg/sec
220
in-lbs
Cont.
Rotation
28
VDC
The Model 996-01 Rotary Servo Actuator provides auto throttle operation as derived by the aircraft's Flight Control Surfaces.
 
Rotary Position Transmitter & Switch Modules
These modules monitor the stabilizer position of commercial aircraft. The output signal of the modules interface with the aircraft's cockpit indicators. They are configured with synchro transmitters, rotary variable differential transformers (RVDT), splined input shaft, anti-backlash spur gearing, electrical receptacles and explosion flame arrestor vents.
Model /
Data Sheet
Outline
Drwg.
CAD Drawing
No Load
Speed
Power
Point
Peak
Force
Stroke
Power
About
(mouse over photo)
3D
Model
-
-
-
-
28
VRMS
400 Hz
Series position transmitter monitors the stabilizer position of a Boeing 757 and 767 commercial aircraft.
-
3D
Model
-
-
-
-
26
VAC
The Model 932-02 Aileron Cable Position/Elevator Cable Position (ACP/ECP) Transducer.
-
3D
Model
-
-
-
-
26
VAC
The flap position transducer is used in C-5 military transports to convert mechanical position of the flaps to appropriate electrical signals for position indication.
3D
Model
-
-
-
-
28
VRMS
Monitors the stabilizer position of the Boeing 757 & 767 commercial aircraft. It is configured with up to six (6) cam driven switches and features.
-
3D
Model
-
-
-
-
6 VAC,
3000 Hz
A position transducer monitors the position of the nacelle of unmanned aerial vehicles.
 
Rotary Servo Actuators
Our Rotary Brush Motor Servo/Actuators utilize brush type DC motors using both Alnico and rare earth magnets. These units have been designed with separate or imbedded analog or digital amplifier, spur gearing and potentiometers as feedback devices. Typical applications include UAV, RPV, target drones and utility aircraft applications.
Model /
Data Sheet
Outline
Drwg.
CAD Drawing
No Load
Speed
Power
Point
Peak
Force
Stroke
Power
About
(mouse over photo)
3D
Model
150-510
deg/sec
-
100
in-lbs
+/-51.5°
28
VDC
Used to position the control surfaces and utility functions of a reconnaissance unmanned aerial vehicle
3D
Model
137
deg/sec
80 in-lbs@
125 deg/sec
300
in-lbs
Stall
+/-30° or
+/-90° electrical
28
VDC
-
3D
Model
6.0 deg/sec
4.4 deg/sec
@ 70 in-lbs
150
in-lbs
+/-45°
Plus others
28
VDC
Used to position the throttle and control surfaces of a remotely piloted vehicle.

-01
-02
-03
-04
-05
3D
Model
190 deg/sec
160 deg/sec
@ 80 in-lbs
150
in-lbs
+/-45°
Plus others
28
VDC
Used to position the throttle and control surfaces of a remotely piloted vehicle.
3D
Model
35 rpm
150 in-lbs @ 25 rpm
300
in-lbs
+/-46°
28
VDC
The Model 865-66 Rotary Servo Actuator is used to position the control surfaces of a reconnaissance unmanned air vehicle, and is designed to operate under extreme environmental conditions.
3D
Model
250
deg/sec
150 in-lbs @ 175 deg/sec
300
in-lbs
+/-33°
28
VDC
The Model 905-30 Rotary Servo Actuator is used to position the control surfaces of a reconnaissance unmanned air vehicle and is designed to operate under extreme environmental conditions.
3D
Model
250
deg/sec
150 in-lbs @ 175 deg/sec
300
in-lbs
+/-46°
28
VDC
Rotary servo actuator used to position the control surfaces of the QF-4 unmanned air vehicle and is designed to operate under extreme environmental conditions.
-
3D
Model
-
-
150
in-lbs
Stall
+/-36.5°
Aileron
43.8° CW Canard
29.2° CCW Canard
28 VDC
and
28 VDC reg.
Servo system which is qualified for use on the AQM-37C target.
 
Amplifiers
Moog Components Group's amplifiers are used to control the actuators when the drive electronics are separately located outside the actuators.
Model 871-01
150 VDC transconductance amplifier used with the Model 873 Rotary Actuator.
Model 911-01
270 VDC brushless motor controller for a pump system on a military armored vehicle.
Model 944-01
150 VDC transconductance amplifier used with the Model 875 Rotary Actuator.
Model 962-01
150 VDC tranconductance amplifier used with the Model 961 Rotary Actuator.
Amplifiers are used to control actuators when drive electronics are located seperately outside the actuators.

Integrated Mechanisms
Integrated assemblies range from simple combinations of slip rings and resolvers to sophisticated electromechanical assemblies including the motor, drive electronics, fiber optic rotary joints, hydraulic and pneumatic swivels and RF rotary joints. We also offer and provide fully integrated servo and utility actuators complete with precision gearing, clutches, brakes and closed-loop control electronics.
More Info Price

MOOG MARKASINA A?T ?R?N GRUPLARI

ACTUATORS
ACTUATORS
Motors
Motors
RESOLVER
RESOLVER
Slip Rings
Slip Rings

The Product List