MD10A
MD10A Interpolator
Board-type interpolator for position control
Requires only + 5V DC power supply
High response speed (60 m/min) with high resolution (0.5 µm)
Alarm function
Switch-selectable resolution and output pulse width
A/B quadrature signal, zero point signal, and alarm signal output by differential line driver
Detaylı Bilgi FiyatMD20B
MD20B
Interpolator
Interpolator unit for position control
Selectable resolution and output pulse width
Response speed up to 42m/min at 0.1 µm resolution
Operable from 5 V power supply. With the optional PU20 power supply unit, power for up to 3 axes can be supplied.
2-axis addition available with the analog addition unit MW10
A/B quadrature signal, up/down signal, zero point signal, and alarm signal output by differential line driver.
Generates A/B quadrature output signal with a resolution of 0.1 µm for feedback to a NC unit and up/down output signal for a display unit
Detaylı Bilgi FiyatMJ100/110 Series
MJ500/600/700
MJ620
MJ620
Interpolator
Compact one axis module with analog input port
Divides analog input signal into 32 to 800 divisions
Produces A/B quadrature signal ouput from the differential line driver when combined with SL700 series scale and PL101 series readerhead (both sold seperately).
Detaylı Bilgi FiyatMJ820/821
MJ820/821
Interpolator
Generalized interpolator with serial-interface ouput for FANUC CNCi series and its successor models
Connectable to any general analog-output encoder. Input impedance: 120 Ω 1 Vp-p voltage differential input
Max. response frequency 140kHz for any number of divisions selected
Switch selectable number of divisions: 40, 80, 100, 120, 160, 200, 240, 400, 480, 500, 800, 1000, 1600, 2000, 3200, 4000
Compensation: DC offset, gain, and phase
Power supply: 5 V DC (4.5 to 5.5 V) for MJ820; 12 V to 24 V DC (11V to 32V) for MJ821
Compatible with Sony's SL700 series scales with PL101 reader head
Detaylı Bilgi FiyatMJ830/831
MJ830/831 Interpolator
Interpolator for Mitsubishi MR-J2 Super Series amplifier
Connectable to any general analog-ouput encoder. Input impedence: 120 Ω 1 Vp-p voltage differential input
Max. response frequency 140 kHz for any number of divisions selected
Switch selectable number of divisions: 40, 80, 100, 120, 160, 200, 240, 400, 480, 500, 800, 1000, 1600, 2000, 3200, 4000
Compensation: DC offset, gain, and phase
Power supply: 5 V DC (4.5 to 5.5 V) for MJ830; 12 V to 24 V DC (11V to 32V) for MJ831
Compatible with Sony's SL700 series scales with PL101 reader head
Detaylı Bilgi FiyatSONY MARKASINA AİT ÜRÜN GRUPLARI
