Ono Sokki – EG-225 – ONO-SOKKI-EG-225-EG-225

RP-442Z Low-torque High-resolution type Compact, flat design and low cost with high performance High response and long distance transmission Easy-to-use output signal connector. Large seized MS connector method for signal output connection (cannon plug) Line driver output enables long distance transmission. 2-phase square waveform + “zero mark” ”Noise immunity“ circuit prevents power noise and erroneous signal generation caused by small vibrations. ¡ Standard number of output pulse ( /R) 1000 2000 2500 ¡ Option number of output pulse ( /R) 500 1200 Electrical Specification Output waveform 2-phase square wave + “zero mark” (Timing is selectable. *6 phases of balanced output for each phase) Output voltage Hi: 2.5 V or more, Lo: 0.5 V or less Output type Line driver, equivalent to 26LS31 Adjacent error ±1/20 Power supply 5 VDC ±5% 200mA Response frequency 100 kHz Connection method Connector (cable side:MS3106A18-1S | RP-432Z Compact Multi-use type Compact and economical design for general purpose; ideal for OEM applications 5 VDC or 12 VDC operation Easy-to-use output signal connector 2-phase and zero mark square wave outputs Nine output pulse types to select from. ¡ Standard number of output pulse ( /R) 60 120 300 360 500 600 1000 1024 Electrical Specification Output waveform 2-phase square wave + “zero mark” (Timing is selectable.) Output voltage Hi: 4 V or more, Lo:0.2 V or less (5V-power supply in use) Hi: 10 V or more, Lo:0.3 V or less (12V-power supply in use) Output type Totem pole output, load resistance 1 kΩ or more Adjacent error ±1/20 Power supply 5 VDC ±5% 100 mA or 12 VDC ±5% 100 mA Response frequency 50 kHz Connection method 7-core connector (cable side:TRC116-12A10-7F) Mechanical Specification Maximum rotational speed 5000 r/min Maximum allowable load Radial 20 N | RP-5320D series (RP-5322D/RP-5324D) Rigid type for general-purpose Compact, rigid with thick diameter (φ15) and designed for machine tool. Reduced equivalent load thus enabling long service life by increasing the distance between bearings. Excellent resistance by an oil seal and water-proof type connector as connection method (An oil seal is attached as standard.) Designed to operate with various output pulse types and power-supply voltages. ”Noise immunity” circuit prevents power noise and erroneous signal generation caused by small vibrations. ¡ Standard number of output pulse ( /R) 100 200 300 360 500 600 1000 1200 1800 2000 2500 3000 4096 5000 6000 8192 10000 ¡ Option number of output pulse ( /R) 314 1024 2048 4000 Electrical Specification (*:option) Output waveform 2-phase square wave + “zero mark” (*Timing can be selectable.) Output voltage Hi:10 V or more, Lo:0.5 V or less Output type Totem pole output, load resistance 470 Ω min or more. *Line driver: equivalent to 26LS31 (5 VDC only) *Open collecttor: DC40V 50mA or less (DC12V | Rotary Encoder for industrial use RP-1710/1730 series Bottom-mount type General-purpose industrial type with high reliability and wide range of application u Bottom-mount type@RP-1710 series [Model nameFRP-1711ERP-1712ERP-1713ERP-1714] u Flange-mount type@RP-1730 series [Model nameFRP-1731ERP-1732ERP-1733ERP-1734] Excellent resistance to shock and shaft loading High resolution, wide range of output pulse types to select from (61 types, max. 120000 /R) Line driver output can be selected to enable long distance transmission AC and DC power supply Selectable connection for either terminal strip or connector IP65 (applicable by affixing an oil seal to the rotating shaft and selecting terminal board as an option) CE marking Specification Bottom-mount type RP-1710 series Flange-mount type RP-1730 series The number of output pulses 60, 100 | Rotary Encoder for industrial use RP-1710/1730 series Flange-mount type General-purpose industrial type with high reliability and wide range of application u Bottom-mount type@RP-1710 series [Model nameFRP-1711ERP-1712ERP-1713ERP-1714] u Flange-mount type@RP-1730 series [Model nameFRP-1731ERP-1732ERP-1733ERP-1734] Excellent resistance to shock and shaft loading High resolution, wide range of output pulse types to select from (61 types, max. 120000 /R) Line driver output can be selected to enable long distance transmission AC and DC power supply Selectable connection for either terminal strip or connector IP65 (applicable by affixing an oil seal to the rotating shaft and selecting terminal board as an option) CE marking Specification Bottom-mount type RP-1710 series Flange-mount type RP-1730 series The number of output pulses 60, 100 | Rotary Encoder RP-8524L (Built-in Type) This encoder was developed mainly for mounting on servomotors. The rotation axis is inserted in mating axis as the penetration axis for high space efficiency, and the encoder features structure which withstands severe motion at high temperature and has highly noise resistant signal circuits. The built-in type encoder has long been supplied for servomotors but it is also suitable for incorporating in machines because it takes up little space. Specifications Summary Output waveform Incremental two-phase square wave + Origin output Output type Line driver output (equivalent to 26LS31) Response frequency 200 kHz Power supply 5VDC ± 5%, 180mA Number of output pulses (Pulse/Revolution) 200, 360 | Roller encoder Roller encoders enable line speed and distance measurements. For distance measurement Backlash can be adjusted automatically when stopped in combination of the RV-3150 Reversible counter. (excluding the RP-721) ders ranging from general purpose industrial type to heat resistant type for specialized usage, space-saving compact type for your specific application. Roller encoder | Rotary Encoder SP-405Z (Ultra-compact Type) This encoder was designed as an economy type encoder with ultra compact outer dimensions and light weight of 100 grams only and can be considerable for OEM requirement as well. Seven output pulse type can be chosen among standard models. Specifications Summary Output waveform Incremental two-phase square wave + Origin output Output type Collector output (load resistance 10 kΩ min) Response frequency 50 kHz Power supply 5 to 12VDC, 700mA Number of output pulses (Pulse/Revolution) 60, 100, 200 Ono Sokki ürünlerini satın almak için İmaj Teknik ile iletişime geçebilir detaylı bilgi ve fiyatları öğrenebilirsiniz